TWP 1500 Series 1 Gallon

2 Ratings 2 Reviews
$46.99
AVAILABLE TWP 1500 SERIES COLORS:
1500 CLEAR, 1501 CEDARTONE, 1502 REDWOOD, 1503 DARK OAK, 1504 BLACK WALNUT, 1511 CALIFORNIA REDWOOD, 1515 HONEYTONE, 1516 RUSTIC, 1520 PECAN, 1530 NATURAL

CHOOSE STAIN COLOR IN DROPDOWN BELOW!
Stain Color
 Back to: TWP 1500 Series

TWP 1500 Series Photo Album2 TWP 1500 Series Deck Stain 1 Gallon Calculator

TWP 1500 Series 1 Gallon ColorsTWP 1500 1 Gallon Stain

TWP 1500 is a Semi-transparent Oil-Based wood stain and preservative that is allowed in all 50 states.

The new TWP® 1500 formula is designed to penetrate better, dry faster and outperform the previous TWP® 500 series formula.

TWP® 1500 Series is an EPA registered wood preservative which prevents structural damage and wood decay on exterior above ground wood surfaces such as fencing, decking, wood siding, log homes, and roofing. TWP® 1500 Series resists water absorption that causes warping, cracking and splitting as well as preventing freeze damage in colder climates.

TWP® 1500 Series is a low VOC preservative with special U.V. absorbing pigments that prevent unsightly wood graying, darkening and fading. The selected mildewcides inhibit the growth of mold and mildew which assist in preventing premature discoloration.

TWP® 1500 Series will keep your wood beautiful, fresh and looking new longer. The ease of application and maintenance will allow you to enjoy your investment for years to come.

TWP 1500 Series Stain QuestionsKey Features

  • Preserves natural wood color
  • EPA registered wood preservative
  • Professional choice for all exterior wood surfaces
  • Semi-transparent stain preserves natural color
  • Sheds water longer
  • Prevents mold and mildew
  • Helps to prevent wood rot
  • Easy to apply and can be cleaned and recoated as needed
  • Helps in the prevention of warping, cracking and splitting
  • Low 250 VOC formula, compliant in 50 states
*We do not guarantee stain colors as they will vary widely depending on the wood type, age of wood, prepping of wood, and application. Small samples are available.

1500 Series and Deck Stain 1 Gallon

 

Have Questions on Prep and Application?

Visit our Help Site for all the answers!

TWP Stain HELP

Gallon Sizes: 1's & 5's
Stain Type: Semi-Transparent Oil-Based
Coverage Per Gallon: 150-200 square feet
Coats  Required: 1-2 Coats. "Wet on Wet"
Temperature: 45-95 F
Application Tools: Pad, Sprayer, Brush, Roller
Dry Time: 12-72 Hours
Cleanup: Mineral Spirits
State VOC Limits: Compliant in all States
More Info:

Product Data

TWP 1500 Series Info

 

Reviews

Wednesday, 02 October 2019

We have used this product twice on our pressure-treated wood deck (. It applies easily and looks terrific when done. We are DIYers with limited experience with this sort of project, and had no trouble following the application directions. We had to address a lot of wood damage before applying it--severe UV damage, mold and mildew--but with the right prep, we couldn't be happier with the outcome. The second time we used it, we did over-apply a bit and had a lot of shiny excess stain after a few hours of drying. We read the tips here on the website and the next day we wiped off the excess using a light misting of mineral spirits and shop rags. Easy fix and it looks great. Never any peeling, which is just what we wanted, and it made our heavily damaged wood look better than we thought possible. I love finding a product that works as well as advertised.

Julia

Thursday, 19 October 2017

A true oil-based wood preservative that is allowed in all 50 states!

TWP Stains

Please log in to write a review. Log in

Ask a Question or Post a Picture...
You are guest ( Sign Up ? )
or post as a guest
Loading comment... The comment will be refreshed after 00:00.
  • We will reply to your comment shortly
    Jon · 08/10/2018
    what are the differences between your 1500 and 100 series stains?
  • We will reply to your comment shortly
    Gregory Falzetta · 08/07/2018
    Can the TWP 1500 be applied with an airless spray gun?
  • We will reply to your comment shortly
    Jan · 08/05/2018
    I intend to stain vertical wood fence. May be from redwood planks, not sure, but it is relatively light. I would not want this fence to get darker. We are in San Francisco, this fence faces north and gets perhaps 2-3 hours of sunlight/day (see also my previous note). What do you recommend? What is the drawback of "clear" stain?
    • We will reply to your comment shortly
      TWP Stains · 08/06/2018
      Clear will have no UV protection from graying. Must be tinted. Try the Honeytone for the lightest tint.
  • We will reply to your comment shortly
    Jan · 08/05/2018
    I used TWP1530 Naturel on deck and it became much darker. I expected that the tone will be the same. What is your stain with the "lightest" tone?
    • We will reply to your comment shortly
      TWP Stains · 08/06/2018
      Honeytone 1515 is the lightest.
  • We will reply to your comment shortly
    Dale s · 08/02/2018
    I have had cedar decking in my garage for a month on racks waiting for some free time to use replacing some old pressure treated lumber on our dock. Being on a rack it is getting real good air circulation. I was unsure what I wanted to stain and protect it with but your product is highly recommended. I want to apply the stain prior to installing. Reading your prep suggestions says I should wait 4 months before applying, which means I won’t be able to install until next year as we are in Wisconsin and 4 months puts us when our dock is no longer in the water. Do I need to wait that long, and if so can the wood remain in garage or does it need to be in the weather. Also, should I stain all sides of wood since it will be over water? Which of your products would you recommend,the 100 or 1500 series? Thanks
  • We will reply to your comment shortly
    TOM ARSENAULT · 07/27/2018
    Does 1500 contain anything that will inhibit the attack of boring bees? If not, do you know of an additive I can put into the 1500 product?
  • We will reply to your comment shortly
    John · 07/17/2018
    I previously used 1530 on a deck, fence and pergola project. I had a couple gallons left over and am using those on a new chicken coop. I'm now worried that it may not be safe for this use.

    Do you have any advice on its safety for a chicken coop (wanted to match the same tone, etc.)? Also, is there any way to seal over this? With, say, a polyurethane or similar product, that would make it safe if it is not, in fact, safe for this use?
    • We will reply to your comment shortly
      TWP Stains · 07/17/2018
      The TWP 1500 series is a full curing stain. Once it is cured, it is fine for a chicken coop. We have had other people use it in this capacity.

      You cannot top coat TWP with a sealer or poly.
      • We will reply to your comment shortly
        John · 07/17/2018
        Also, the TWP 1500 would be applied to many interior surfaces of the coop as well. Does that change anything re: safety?
        • We will reply to your comment shortly
          TWP Stains · 07/17/2018
          Once fully cured, there should be no issues.
      • We will reply to your comment shortly
        John · 07/17/2018
        How long does it take for the TWP 1500 to cure?
  • We will reply to your comment shortly
    Mark · 07/16/2018
    I have a 1 year old cedar fence, which redwood stain do you recommend, twp 100 or 1500
  • We will reply to your comment shortly
    Bryce · 07/10/2018
    This will be the first stain it is receiving.
  • We will reply to your comment shortly
    Bryce · 07/10/2018
    I live in Illinois. Last year I put up a 10' x 10' Cedar Pergola. I'm now looking to stain it. Do I need to sand or brighten it first being so new or can I just stain it?
  • We will reply to your comment shortly
    Ryan · 07/03/2018
    After stripping an brightening do you recommend sanding? There are raised wood fibers.
    • We will reply to your comment shortly
      Ryan · 07/03/2018
      also the stripper and brightener came from Sherwin Williams. Will this effect the final outcome?
      • We will reply to your comment shortly
        TWP Stains · 07/03/2018
        It shouldn't. Lightly sand or buff the floor to remove raised wood fibers with 60 grit paper if needed.
  • We will reply to your comment shortly
    Tom · 07/01/2018
    I stained my deck 3-4 years ago with TWP 350 max voc formula. Part of the deck is under roof and has not weathered as much as the parts that are exposed. I live in Pennsylvania so I'm not sure what formula to use or how deck should be prepared. I would like to re-stain with the same color #1530 natural.
  • We will reply to your comment shortly
    Deanne · 06/25/2018
    I stained some patio furniture, how long before it will be safe it sit on without color coming off on clothes?
    I put 2 coats on the horizontal surfaces, in 70 degree weather. After cleaning and pressure washing, allowing that the dry 3 days.
    • We will reply to your comment shortly
      TWP Stains · 06/25/2018
      A few days and it should be okay but test first. Could take as long as a week.
  • We will reply to your comment shortly
    willie · 06/22/2018
    i have a deck that is stained with a solid water base stain( 3 years ago) so if i strip it power wash it and put wood brightener on iy will i be able to use TWP 1500 oil stain on it once it dries completely.
    • We will reply to your comment shortly
      TWP Stains · 06/22/2018
      You cannot strip off a solid stain. You will need to remove by sanding this off. Once removed, use the Gemini Restore Kit for the final prep.
  • We will reply to your comment shortly
    Phil · 06/17/2018
    Follow-up from Phil, 6/17/18. I live in central North Carolina, near Greensboro.

    BTW, thanks for the prompt reply, especially on a Sunday.
  • We will reply to your comment shortly
    phil · 06/17/2018
    Have a 4-year old deck of 2X6 treated pine. Have stripped (Cabot semi) and brightened with Restore-a-Deck. What is the difference between your Series 1500 vs. 100? Which do you recommend? Also would I gain significantly from the extra process of sanding?
    • We will reply to your comment shortly
      TWP Stains · 06/17/2018
      Sanding is not needed and can create issues with absorption. As for which type, that depends on where you live?
  • We will reply to your comment shortly
    Fred Peters · 06/05/2018
    Does 1500 series prevent damage by carpenter bees?
  • We will reply to your comment shortly
    Andy · 05/29/2018
    My deck includes (pressure treated southern pine) built-in benches. Some stains from other manufacturers specify "not for sitting surfaces or furniture". (I assume this is because clothing may get stained). Are any of your oil-based stains suitable for sitting surfaces?
    • We will reply to your comment shortly
      TWP Stains · 05/29/2018
      Yes. TWP is a full curing stain so it does not rub off.
  • We will reply to your comment shortly
    John · 05/07/2018
    I just put new Pressure-Treated on my deck, its been at least 9 months exposed and ready I'm ready to stain it, looking for the most natural look as it like the contrast between the black square spindles and the light current color of the wood. Is the natural or the honey the lightest color?
  • We will reply to your comment shortly
    Mike · 04/21/2018
    Is the cape cod gray still available? I got a sample in the summer and would like to purchase. Thanks