Deck Revive Kit

$250.00
free shipping with ground services
 Back to: Gulf Synthetics

pdf-brochurepdf-instructionspdf-msdsprojectBrochure

NOTE: You must use PermaBond as a primer coat.

DeckRevive is a one-of-a-kind polymer coating that resurfaces and restores aging wood decks, walkways, steps and more, allowing you to enjoy your existing structure for years! Just add one gallon of gloss exterior acrylic latex paint of any color and roll on with everyday paint tools.

  • locks down splinters
  • fills in cracks
  • slip resistant
  • environmentally friendly

COVERAGE: Depending on the condition of the wood and the application technique, two coats will cover approximately 200 square feet per Deck Revive Kit.

Unlike other "Deck Resurfacer" type products, Deck revive is breathable, allowing moisture to escape.

Gulf3medium

A Superior Deck Coating - Why Deck Coatings Fail?

  • Wood begins to degrade at the logging stage The “lignin” (organic polymer in wood) eventually fails and releases along the grain causing cracking and splitting
  • Cracks then allow moisture to enter the wood
  • Wood then begins to delaminate and splinter and eventually, due to rot, will disintegrate

Deck Revive Gulf Synthetics

Traditional deck stains, deck paints and deck sealers just put new color on old splinters, cracks and nailheads and have to be re-applied annually. Deck Revive actually fills in cracks and knots, locks down splinters and nailheads, and provides a new slip-resistant textured surface that lasts for years.

Our Deck Revive coating will give you a new durable, scuff, stain and fire-resistant surface that requires zero to little maintenance. So easy to apply with everyday paintbrushes and rollers and tools clean up with water. Dries quickly for minimal time-out-of-service. Can be applied in the morning and enjoyed that evening.

Your Deck Revive kit contains a liquid component and a dry component. To these, you add one gallon of ANY color of exterior latex paint. Color choice is unlimited – you can have any color your paint store can mix up!

Deck Revive is the environmentally friendly choice. It is water-based, VOC-free and non-toxic. When you refurbish existing wood structures with Deck Revive, you prolong their service life and keep them out of landfills.

Save thousands over the cost of replacement or annual deck stain and deck seal maintenance when you choose Deck Revive. You’ll also save time — so you can spend more of it enjoying your outdoor living spaces, not maintaining them!

So take your shoes off and start enjoying your old deck with our revolutionary resurfacing coating. Your family, friends, and kids can run around splinter free for years to come.

 

Reviews

Thursday, 19 October 2017

The top-rated deck surface coating.

TWP Stains

Please log in to write a review. Log in

Ask a Question or Post a Picture...
You are guest ( Sign Up ? )
or post as a guest
Loading comment... The comment will be refreshed after 00:00.
  • We will reply to your comment shortly
    Carol Crawford · 04/17/2023
    Can I order the 1/4 kit as well as the full kit from you?
    • We will reply to your comment shortly
      TWP Stains · 04/17/2023
      Only comes in full kits now.
  • We will reply to your comment shortly
    Charles Cloyd · 02/05/2023
    Once applied, how often would this product need reapplication and what preparation would be required for additional coats? 
    • We will reply to your comment shortly
      TWP Stains · 02/05/2023
      Redo as needed every 3-5 years. Pressure wash for prep when reapplying.
  • We will reply to your comment shortly
    walt lane · 07/25/2022
    Hello, I am going to have to use a clear penetrating epoxy sealer for a few shallow soft spots on my wood deck. Will permabond adhere to the cpes once it is fully cured?
    We live on the Washington state coast and the temperatures haven't been above the 60's all summer with high humidity.  Misty showers pop up all the time. My questions is if I apply the permabond and we get enough moisture to prevent the application of the Deck Revive how soon can I reapply the permabond after it dries out? I have enough of the Permabond to reapply.  With the humidity I will need to get a very early start to complete all the applications in one day and there is a chance of a misty shower poping up.
    I am using multiple Deck Revive kits to do our deck... after mixing each should I box the kits together before applying?
    Thanks!
    • We will reply to your comment shortly
      TWP Stains · 07/26/2022
      You can reapply the Permabond if needed, just make sure it is dry. Do not mix all buckets of Deck Revive at once. They have a pot life.
      https://www.twpstain.com/gulfsynthetics/DeckRevive-1-1-13-instructions.pdf
      • We will reply to your comment shortly
        Walt lane · 07/26/2022
        Really need to know if the Permabond will adhere to the penetrating sealer once the sealer is completely cured
        • We will reply to your comment shortly
          TWP Stains · 07/26/2022
          Honestly have no idea as it has not been attempted. If you need to fill something, use the Quickrete patch as in the picture.
  • We will reply to your comment shortly
    Shawn · 08/25/2018
    I have an existing deck that is part wood and part composite. I wish to change the color on both components to match. Can this product be used on composite decking?
    • We will reply to your comment shortly
      TWP Stains · 08/26/2018
      No, it has not been tested for composites so we do not know if it will work correctly or not.
  • We will reply to your comment shortly
    TWP Stains · 06/19/2017
    ROCHELLE"]what color is the "dry" component? do you have to add a can of paint to the revive kit for moisture and proper mixture?[/quote]
    Yes, [quote name="ROCHELLE:
    what color is the "dry" component? do you have to add a can of paint to the revive kit for moisture and proper mixture?

    you have to add the gallon of paint to this kit. It will not work without it.
  • We will reply to your comment shortly
    ROCHELLE · 06/19/2017
    what color is the "dry" component? do you have to add a can of paint to the revive kit for moisture and proper mixture?
  • We will reply to your comment shortly
    TWP Stains · 08/23/2016
    Bruno:
    Can I mix with any brand of paint and color I want? and I don't want to put texture in there. Is texture optional or it has any chemical that latex needs??
    Thanks for your help

    The texture is in the mix and cannot be removed. You can mix with any brand or color. It does have to be a Acrylic Gloss Latex Paint.
  • We will reply to your comment shortly
    Bruno · 08/23/2016
    Can I mix with any brand of paint and color I want? and I don't want to put texture in there. Is texture optional or it has any chemical that latex needs??
    Thanks for your help
  • We will reply to your comment shortly
    TWP Stains · 11/17/2015
    Melissa Mcdougal:
    I previously put Behr Deckover on my deck. I have removed all chipping portions and have sanded(dulled) the rest. Can I apply Deck Revive over this product?

    If you use the Permabond first and apply the Deck Revive it will adhere to the Behr Deckover so the Deck Revive would not peel. What you cannot do is "fix" the Behr Deckover where it is still intact. Meaning you would still be at the mercy of possibly prematurely failing based on the adhesion of the Behr Deckover to the wood, not the Deck Revive to the Behr Deckover.
  • We will reply to your comment shortly
    Melissa Mcdougal · 11/16/2015
    I previously put Behr Deckover on my deck. I have removed all chipping portions and have sanded(dulled) the rest. Can I apply Deck Revive over this product?
  • We will reply to your comment shortly
    TWP Stains · 11/06/2015
    Tom Zimmerer:
    It doesn't make sense that one adds 1 gallon of paint to the 1/4 kit and the same 1 gallon to the full kit? Please comment! Thanks
    I did 500 as. Ft. Of deck last year with Restore!! So I am very careful.

    The instructions say to add one quart to the 1/4 kit and 1 gallon to the full kit.
  • We will reply to your comment shortly
    Tom Zimmerer · 11/05/2015
    It doesn't make sense that one adds 1 gallon of paint to the 1/4 kit and the same 1 gallon to the full kit? Please comment! Thanks
    I did 500 as. Ft. Of deck last year with Restore!! So I am very careful.
  • We will reply to your comment shortly
    TWP Stains · 11/03/2015
    Ed Billingsley:
    I have Deck Revive applied and would like to change the color of the deck. The present color is to light and shows to many stains. The deck has been down for 9 months or so. Can I apply a new coat of Deck Revive over the existing coat?

    Thank you for your time.

    You will have to clean lightly and prep with the Perma Bond first.
  • We will reply to your comment shortly
    Ed Billingsley · 11/02/2015
    I have Deck Revive applied and would like to change the color of the deck. The present color is to light and shows to many stains. The deck has been down for 9 months or so. Can I apply a new coat of Deck Revive over the existing coat?

    Thank you for your time.
  • We will reply to your comment shortly
    TWP Stains · 09/10/2015
    Denis Poudrier:
    Are your products available in Canada?

    No they are not. We can ship there if you call over the phone to place an order.
  • We will reply to your comment shortly
    Denis Poudrier · 09/09/2015
    Are your products available in Canada?
  • We will reply to your comment shortly
    TWP Stains · 08/24/2015
    Robert H.:
    Can Deck Revive be used for the railings and other vertical surfaces of a deck?

    Yes it can be used for verticals.
  • We will reply to your comment shortly
    Robert H. · 08/23/2015
    Can Deck Revive be used for the railings and other vertical surfaces of a deck?
  • We will reply to your comment shortly
    TWP Stains · 08/17/2015
    Steven Doucette:
    Hi, I have a few questions about your product. How many gallons would I need for a 16'x32' deck? are there any special prep products required? what type of roller is needed?

    You can prep with just a pressure washer to remove any dirt, grime, etc.

    Each full Deck Revive kit covers 200 sq. feet for two coats.
  • We will reply to your comment shortly
    Steven Doucette · 08/16/2015
    Hi, I have a few questions about your product. How many gallons would I need for a 16'x32' deck? are there any special prep products required? what type of roller is needed?