TWP 100 series deck stain 1 gallon
TWP 100 series deck stain 1 gallon
TWP 100 series deck stain 1 gallon
TWP 100 series deck stain 1 gallon
TWP 100 series deck stain 1 gallon
TWP 100 series deck stain 1 gallon

TWP 100 Series 1 Gallon

1 Rating 1 Shopper Review
$33.99
Stain Color
 Back to: TWP 100 Series

TWP 100 Series Photo Albums2 TWP Stain Calculator

TWP 100 Series Deck Stain Colors 1 GallonTWP 100 Series Stain

TWP 100 Series is an EPA registered wood and deck stain and preservative. Containing unique ingredients which protect wood from damage, TWP 100 series has been a leader and respected product for over 25 years.

  • TWP 100 Series Stain QuestionsPenetrating and enhances natural wood tones in 8 different colors
  • Preserves wood from turning gray
  • Sheds water
  • Used for all types of exterior natural wood - Decking, Wood Houses, Wood Fencing, Hardwoods, etc
  • Not prone to Mildew and Mold

Please Note:

TWP 100 Series is not compliant in all states. Please read this for additional information: VOC States.

TWP 1500 series can be shipped to all 50 states.

*We do not guarantee stain colors as they will vary widely depending on the wood type, age, of wood, prepping of wood, and application. Small samples are available.

*TWP 105 Cape Cod Gray and 106 Prairie Gray are close to semi-solid in appearance.

TWP 100 Series 1 Gallon Deck Stain

 

 

Have Questions on Prep and Application?

Visit our Help Site for all the answers!

TWP Stain HELP

Gallon Sizes: 1's & 5's
Stain Type: Semi-Transparent Oil-Based
Coverage Per Gallon: 100-200 square feet
Coats  Required: 2 Coats. "Wet on Wet"
Temperature: 45-95 F
Application Tools: Pad, Sprayer, Brush, Roller
Dry Time: 4-24 Hours
Cleanup: Mineral Spirits
State VOC Limits: Not Compliant in all States
More Info: Product Data

Reviews

Wednesday, 03 May 2017

Used on my deck. Lasted 3 years. Just clean and reapply.

TWP Stains
Related
TWP 100 series deck stain 5 gallon

Gemini Restore-A-Deck Kit

Restore A Deck Stain Stripper and Brightener Kit

Bug Juice For 1 Gallon of Stain

Ask a Question or Post a Picture...
You are guest ( Sign Up ? )
or post as a guest
Loading comment... The comment will be refreshed after 00:00.
  • We will reply to your comment shortly
    TWP Stains · 05/24/2014
    Dale K:
    Do you have a local dealer in the Provo, UT. area? 84057

    We personally do not.
  • We will reply to your comment shortly
    Dale K · 05/23/2014
    Do you have a local dealer in the Provo, UT. area? 84057
  • We will reply to your comment shortly
    TWP Stains · 05/19/2014
    ROGER PIGG:
    Is this product considered transparent or semi-transparent?

    Semi-transparent
  • We will reply to your comment shortly
    ROGER PIGG · 05/19/2014
    Is this product considered transparent or semi-transparent?
  • We will reply to your comment shortly
    TWP Stains · 05/13/2014
    bearmoss:
    I will need aprox 7 gallons to do my deck. If I buy 2 5 gal pals will the remainder be good to do a maintenance coat next spring?

    Please read article here on this:
    http://www.twpstainhelp.com/shelf-life-of-twp/
  • We will reply to your comment shortly
    Larry Moss · 05/12/2014
    I will need aprox 7 gallons to do my deck. If I buy 2 5 gal pals will the remainder be good to do a maintenance coat next spring?
  • We will reply to your comment shortly
    TWP Stains · 05/11/2014
    ben blackwell:
    are your products available at retail outlets in albuquerque, nm area?

    We are an online dealer for TWP and personally do not have a dealer there.
  • We will reply to your comment shortly
    ben blackwell · 05/10/2014
    are your products available at retail outlets in albuquerque, nm area?
  • We will reply to your comment shortly
    TWP Stains · 05/08/2014
    Peter B, not you cannot apply a third coat and you do not want TWP to gloss. It will be over applied and fail quicker. Need to remove the Sikkens.
  • We will reply to your comment shortly
    Peter B · 05/07/2014
    Hello, I have a few questions. I would like to use the 100 series on garage doors and shutters. If I apply several coats 'wet on tacky' and even a 3rd coat (either over the dried product or the tacky 2nd coat (if you're following me) - my goal is to produce a satin or semi-gloss shine. will that work?
    secondly, i have a customer who's deck i have stained for many years with Sikkens SRD. I would like to switch over and try the 100 series. Can i wash or scuff sand the Sikkens and go over with 100 or do i need to remove the the old Sikkens entirely?
    Thank you!
  • We will reply to your comment shortly
    TWP Stains · 01/27/2014
    Craig, TWP needs to be redone every 2-4 years for most scenarios. Best to prep with the Gemini Restore Kit, light pressure washing, then re coat with the same.

    This article will help:
    http://www.twpstainhelp.com/applying-a-maintenance-coat-of-twp/
  • We will reply to your comment shortly
    craig kinsman · 01/26/2014
    Hello. I have applied twp100 on exterior cedar shakes and white pine fascia. After 2.5 years, there is black and grey showing through everywhere. Things are not looking good. I have to do something. Please let me know what I can do to deal with this. Thanks
  • We will reply to your comment shortly
    TWP Stains · 01/14/2014
    Either the 100 or 1500 would work for this siding on Louisiana. Take inconsideration the Honeytone is the lightest tint. Lighter tints will fade faster then darker colors. You would need roughly 25-5 gallons of stain.
  • We will reply to your comment shortly
    craig perque · 01/14/2014
    I want to cover approx 4000 sq ft of kiln dried cypress siding. Can you tell me how much I need and which series of product would work best in south Louisiana. Thinking of honeytone for the color.
  • We will reply to your comment shortly
    TWP Stains · 10/27/2013
    Jerry, please read this about new wood:
    http://www.twpstainhelp.com/prepping-new-wood-for-twp-stains/

    I would wait until Spring and use the 101 Cedartone.
  • We will reply to your comment shortly
    Jerry Crump · 10/26/2013
    I have a new cedar arbor, 2'x7' lattice sides with top pieces. The maker recommends semi transparent penetrating oil stain nat'l cedar. Is TWP Cedar 101 the right product for me? Shipping time to zip 28078. Thanks, Jerry
  • We will reply to your comment shortly
    TWP Stains · 08/14/2013
    Jason, about 5-7 gallons. You will need to back wipe if applying with a sprayer.
  • We will reply to your comment shortly
    Jason Seck · 08/14/2013
    How much TWP 100 needed to cover 810 SF of new rough cedar with a pump sprayer?
  • We will reply to your comment shortly
    Mary Seeger · 07/23/2013
    Where do I buy TWP. Zip 97220
  • We will reply to your comment shortly
    JesseK · 07/21/2013
    Does this product need to be wiped with a rag after application like a penetrating oil?