TWP 100 Series 1 Gallon

$33.99
Stain Color
 Back to: TWP 100 Series

TWP 100 Series Photo Albums2 TWP Stain Calculator

TWP 100 Series Deck Stain Colors 1 GallonTWP 100 Series Stain

TWP 100 Series is an EPA registered wood and deck stain and preservative. Containing unique ingredients which protect wood from damage, TWP 100 series has been a leader and respected product for over 25 years.

  • TWP 100 Series Stain QuestionsPenetrating and enhances natural wood tones in 8 different colors
  • Preserves wood from turning gray
  • Sheds water
  • Used for all types of exterior natural wood - Decking, Wood Houses, Wood Fencing, Hardwoods, etc
  • Not prone to Mildew and Mold

Please Note:

TWP 100 Series is not compliant in all states. Please read this for additional information: VOC States.

TWP 1500 series can be shipped to all 50 states.

*We do not guarantee stain colors as they will vary widely depending on the wood type, age, of wood, prepping of wood, and application. Small samples are available.

*TWP 105 Cape Cod Gray and 106 Prairie Gray are close to semi-solid in appearance.

TWP 100 Series 1 Gallon Deck Stain

 

 

Have Questions on Prep and Application?

Visit our Help Site for all the answers!

TWP Stain HELP

Gallon Sizes: 1's & 5's
Stain Type: Semi-Transparent Oil-Based
Coverage Per Gallon: 100-200 square feet
Coats  Required: 2 Coats. "Wet on Wet"
Temperature: 45-95 F
Application Tools: Pad, Sprayer, Brush, Roller
Dry Time: 4-24 Hours
Cleanup: Mineral Spirits
State VOC Limits: Not Compliant in all States
More Info: Product Data

Reviews

Wednesday, 03 May 2017

Used on my deck. Lasted 3 years. Just clean and reapply.

TWP Stains
Ask a Question or Post a Picture...
You are guest ( Sign Up ? )
or post as a guest
Loading comment... The comment will be refreshed after 00:00.
  • We will reply to your comment shortly
    Eric · 05/23/2019
    I've just read two years worth of questions and answers. I'm impressed with your responsiveness and patience (there are alot of repeat questions).

    I have a few questions.
    1. I've powerwashed my 20 year old cedar deck. The last application of stain (Cabot, I think) was probably 5 years ago. Do I need to clean AND brighten, or just brighten?
    2. I probably need to strip (and clean and/or brighten per the answer to #1) the railings, particularly the spindles because I couldn't powerwash the spindle sides that faced each other. I know you can't give me a definitive answer, but is it typically sufficient to spray on stripper and then powerwash? Maybe twice?
    3. I bought a recommended pad applicator. Is that ok for both coats or do I have to "back-brush". If so, what is "back-brushing"?
    4. There is a stained area where the grill was. I expect I need to sand it (if stripping doesn't do anything). I know you're not a fan of sanding because it closes the grain. Is the brightener sufficient to re-open the grain?

    Thanks for all your help.
  • We will reply to your comment shortly
    Eric · 05/22/2019
    I've got 500 sf to stain. If coverage is 100 - 200 sf, is that one coat or two?
    • We will reply to your comment shortly
      TWP Stains · 05/22/2019
      You will need 5 gallons for the two coats.
  • We will reply to your comment shortly
    Jonathan · 05/03/2019
    I will be applying TWP 100 to my new, untreated cedar deck. Beside washing the deck and allowing 48 hours of dry time, will I need to use any other prep product on the wood before application?
    • We will reply to your comment shortly
      • We will reply to your comment shortly
        Jonathan · 05/03/2019
        Thank you. For the deck I will let it weather for 4 months before application. I will also be using twp100 clear on a pine tongue and groove porch roof. This wood will also be new. This wood will not see much if any water or sun and therefore won’t weather much. I would like to apply the twp100 clear to all sides of this siding before install. Would this be ok to do before install? Should I use one of your prep products before applying the clear?
        • We will reply to your comment shortly
          TWP Stains · 05/04/2019
          No reason to apply to all sides and it is not suggested. Just the exposed side after install. Prep first to remove mill glaze.
  • We will reply to your comment shortly
    Neal · 04/29/2019
    With the prairie gray and cape cod colors, are they easy to reapply maintenance coats since they are "closer to a semi-solid appearance"?
  • We will reply to your comment shortly
    Bruce Beck · 04/20/2019
    I wish to apply a maintenance coat of TWP to my porch which was originally treated four years ago with TWP 120-1 pecan. How much product will I need for 350 sq. feet and can I apply it over the original treatment?
  • We will reply to your comment shortly
    Gabe · 04/20/2019
    IS TWP good for exotic wood such as IPE?
  • We will reply to your comment shortly
    Kevin · 03/12/2019
    I’m building a pergola out of rough sawn red cedar. Can I let the lumber dry out in my garage and then apply TWP 100 or 1500?
  • We will reply to your comment shortly
    Nancy · 03/05/2019
    I had a carport installed last week. The posts are treated wood and the top is cedar. What stain color would you recommend using on the treated wood and cedar for it to look more uniform?
  • We will reply to your comment shortly
    Will · 02/02/2019
    I have some leftover TWP 100 from staining my porch. Can I use it on a picnic table or is it inappropriate for an eating surface?
    • We will reply to your comment shortly
      TWP Stains · 02/03/2019
      As long as you prep the picnic table correctly, you are okay. Make sure to allow the TWP to fully cure before using.
  • We will reply to your comment shortly
    Barbara · 01/19/2019
    Is there an advantage to using twp 100 over TWP 1500 if your state allows it? I will be staining a new wood deck about 12 months after it was constructed.
    • We will reply to your comment shortly
      TWP Stains · 01/20/2019
      No advantage. They will both last about the same.
  • We will reply to your comment shortly
    Doug · 11/09/2018
    I am absolutely not allowed to apply anything on or even near the water. No mitigation is acceptable. I will have to remove the deck transport it off the water and stain it there. A lot of extra work. Do you recommend staining all sides or just the top?
  • We will reply to your comment shortly
    Doug · 11/08/2018
    I am getting ready to install 2x6 KDAT decking on a dock. I would like to stain all sides of the boards but this will have to be done before installation. I would not be able to wait the recommended 2 months. I am not allowed to apply stain on the boards if they are on the floating dock per lake regulation.
    What is my next best option?
    • We will reply to your comment shortly
      TWP Stains · 11/09/2018
      You cannot do it now as it needs to weather. Install, let weather, prep, and stain. You can either remove from water to stain or use something to catch the stain drips from getting into the water.
  • We will reply to your comment shortly
    Debbie · 11/02/2018
    What would be the coverage per gallow for TWP100 on Preasure Treated Pine that has been left to dry out for a year? Would I get closer to 100 sqft per gallon or closer to the 200 sqft per gallon? My get is 630 sqft. Thanks!
    • We will reply to your comment shortly
      TWP Stains · 11/02/2018
      You will need about 5-6 gallons for the 630 sq feet and the two coats applied wet on wet.
  • We will reply to your comment shortly
    matt · 09/27/2018
    OR Cape Cod Grey?
    • We will reply to your comment shortly
      TWP Stains · 09/28/2018
      As long as the wood is prepped correctly.
  • We will reply to your comment shortly
    matt · 09/27/2018
    Will TWP 100 Prairie Gray work on chairs made out of pine? Thanks!!
  • We will reply to your comment shortly
    Janice russell · 09/09/2018
    Is cedartone and cedartone natural the same color?
  • We will reply to your comment shortly
    David · 09/04/2018
    Late yesterday-Monday, I prepped my wood deck with the Gemini restore deck kit--cleaner and brightener. I understand I need to wait 48 hours before staining (TWP 100 pecan)--so I am good to stain tomorrow-Wednesday late in the day. However, rain is forecast with in 24 hours (maybe 12-18 hours after my stain application (on thursday). The can says don't apply the stain if rain is expected in 48 hours. SHOULD I WAIT TO STAIN FOR A DAY WHERE THERE IS NO FORECASTED RAIN THREAT? I would really like to get this done tomorrow if at all possible and not delay it
    Thanks Dave
    • We will reply to your comment shortly
      TWP Stains · 09/04/2018
      12-24 hours after applying should be okay for a rain.

      Thanks
      • We will reply to your comment shortly
        David · 09/06/2018
        I applied the TWP 100 yesterday and thankfully 12 hours later--no rain.
        How soon can it be walked on? (I've read the can twice and it has zero instructions on how to tell when it's okay to walk on the deck after staining)
        thanks
        • We will reply to your comment shortly
          David · 09/06/2018
          Also--I have a few shiny places on some boards--I guess I didn't wipe up the excess stain on those areas well enough
          Is there a fix for this---14 hours after application? (maybe wipe with some mineral spirits?)
        • We will reply to your comment shortly
          TWP Stains · 09/06/2018
          12-48 hours. Make sure it is dry and not sticky or tacky.
  • We will reply to your comment shortly
    McKenna · 08/28/2018
    My neighbor decided to run his sprinklers and soak my fence just hours after staining....is there anything that can be done? What happens when the fence gets wet after staining?
    • We will reply to your comment shortly
      TWP Stains · 08/28/2018
      Hard to say if affected or not but most likely fine. It would very noticeable if it is an issue with stain drips and runs.
      • We will reply to your comment shortly
        McKenna · 08/28/2018
        :( now that its daylight I can see the damage. Only dripping in 6-7 areas on 1 side of the fence. Anything I can do to soften the spots up without redoing the whole thing?
        • We will reply to your comment shortly
          TWP Stains · 08/28/2018
          FYI, that is not from the sprinklers but bleed through from the opposite side. Try just touching up those 7 boards by lightly recoating them. Make sure do the entire board length end to end.
  • We will reply to your comment shortly
    Lynda Bowers · 08/23/2018
    I am unable to find the clear I was told you have, please help me I need to order asap
    • We will reply to your comment shortly
      TWP Stains · 08/23/2018
      Click the stain color options in the drop-down above the add to cart.
  • We will reply to your comment shortly
    Patti · 08/20/2018
    Hi,

    I had a new PTP deck installed approx. 7 months ago. Approx. one month ago two boards were sanded down level with the other boards bc they had warped/risen up higher than the other boards on deck. I live in the NC mountains w/lots of shade, rain and prone to mold/mildew. How long should I wait for those two boards to weather before I stain, and do you recommend TWP 100 or 1500? Also, do you think Gemini deck cleaner/brightener kit will remove the wood stamps?

    Thank you so much!

    Patti
    • We will reply to your comment shortly
      TWP Stains · 08/20/2018
      Use the TWP 100 Series. The prep kit will not remove the stamps. You will have to sand them off now. Let all wood weather for 1-2 months after you sand and then proceed with the prep and stain.