TWP 1500 Series Deck Stain - The Best Low VOC Deck Stain

Need Help with your TWP 1500 Stain?

TWP 1500 Stain is a highly rated, EPA registered wood preservative that can be used for all types of exterior wood, siding and decking. TWP 1500 Stain will perform at its maximum potential when the wood is properly prepped and when the stain is properly applied. Unfortunately not all wood is in the same condition prior to applying the stain.

We are here to help with your project!

Please answer these few questions to achieve the best possible results with your TWP 1500 Wood and Decking Stain.

  1. info buttonAge of wood?
  2. Type of wood?
  3. Condition of the wood?
  4. Has it been stained previously and if so with what brand of stain?
  5. Small description of the area to be treated.

Ask Questions in Comment Area Below

Ask a Question or Post a Picture...
You are guest ( Sign Up ? )
or post as a guest
Loading comment... The comment will be refreshed after 00:00.
  • We will reply to your comment shortly
    TWP Stains · 06/18/2013
    1992 Star Batt
    Rochester Hills, MI 48309
  • We will reply to your comment shortly
    john s. · 06/18/2013
    I live in Jackson, Michigan 49201. Where can I buy TWP 1500 stain?

    Thank you
  • We will reply to your comment shortly
    TWP Stains · 06/18/2013
    It will probably go bad.
  • We will reply to your comment shortly
    bluemccabe · 06/18/2013
    I have a new pine deck about 265 sq. ft. If I order 5 gallons and use 1/2 now and 2nd coat next year, will the stain keep well? Any problems with storing for that length of time?
  • We will reply to your comment shortly
    TWP Stains · 06/18/2013
    David, clear will not give you UV protections. You must use a tint. This will enhance the wood grain of table.

    http://www.twpstainhelp.com/tips/need-help/twp-color-tips/
  • We will reply to your comment shortly
    David McKirnan · 06/17/2013
    I am building an outdoor table out of new red cedar. It looks as though TWP may be a good option to seal it up.

    I want to keep the color exactly as it is now: light reddish. If I have to deviate from that I would like something just a little more red.

    Do you have a color you would recommend?
    Or:
    Is there someplace I could look at actual color chips, or perhaps a web page with larger & better quality pictures? I cannot tell much from the little pictures you have on your web site.

    Thanks
  • We will reply to your comment shortly
    Renee Adolph · 06/17/2013
    Scott,
    Great idea! That's what I'll do. Thank you very much! :)
  • We will reply to your comment shortly
    ScottS · 06/17/2013
    Renee,
    Thought I'd chime in because your note was very similar to my experience. I tested RB on pressure treated and also felt it was too Red, but Dark Oak was just too dark for me. I then tested a mixture of 3 parts RB and one part Dark Oak and I really like the color. Ultimately that is what I am going to go with once I can find a break in the rainy weather to apply it. You can mix colors of the 1500 series, I've seen others ask the same question on here. But I wouldn't apply one over the other, simply get a big bucket and mix them together and stir it up real good before applying.

    Try testing different combos like 2 parts RB to 1 part Dark Oak. Sincd you dont have lot of sample supply, all you need is a small measuring medicine cup that measure in ML or a tablespoon. Simply mix 2 or 3 tablespoons of RB with 1 tablespoon of dark oak and test that with 2 coats.

    Good luck.
  • We will reply to your comment shortly
    Renee Adolph · 06/17/2013
    I have a 750 sf pine deck I just stripped and cleaned with your Gemini products. (Very effective products, by the way) After sampling your 1516 Rustic Brown and 1503 Dark Oak, I'm wishing you offered a color a little less red than the RB, yet a little redder than the DO to better blend with the color of my log siding. The perfect color actually came up when I applied the Rustic Brown first, then applied the Dark Oak over that. Do you mix colors by chance, or have any recommendations for achieving that effect?
  • We will reply to your comment shortly
    TWP Stains · 06/17/2013
    Prep the wood with the Gemini Restore Kit and a light pressure washing to restore the wood and remove the graying. Look at the TWP 1500 Series for the stain.
  • We will reply to your comment shortly
  • We will reply to your comment shortly
    Len · 06/17/2013
    what would you recommend for me. I have a new pressure treated deck with ceder floor. Just installed last week. Should I seal/stain it right away and if so what product do you recommend? I'd like a transparent finish. The deck is in direct sunlight all morning.
  • We will reply to your comment shortly
    Bob Y · 06/17/2013
    I have a 50 year old post and beam cottage in the Berkshires - western Massachusetts. All western red cedar with a four foot overhang consisting of beams, tongue and groove and fascia. Wood is grey with some minor pitting. I want to bring back to new look. Suggestions please!
  • We will reply to your comment shortly
    TWP Stains · 06/16/2013
    MayLouL, hard to say. It it does not dry properly then you will need to strip and and start over or possibly lightly recoat. If it does not look affected then leave it alone.
  • We will reply to your comment shortly
    TWP Stains · 06/16/2013
    Mike, use the 100 Series for this.
  • We will reply to your comment shortly
  • We will reply to your comment shortly
    MaryLouL · 06/16/2013
    Help. We just had a deck company strip, brighten and 2 weeks later stain our deck and gazebo (yesterday) with your product. An hour later we got an unexpected rain storm, and then another during the night. What will this do to the finish? The stain also ran onto the gazebo screens. Now what? Thanks
  • We will reply to your comment shortly
    Mike Warnick · 06/15/2013
    Have a new deck that is ready to be finished. Live in SE Michigan, deck on west side of home, installed in Oct2012, applied cleaner and scrubbed w/ brush two weeks ago to prep for finishing. Want to leave wood grain showing through and keep natural color as much as possible, what is best product to consider?
  • We will reply to your comment shortly
    John Peters · 06/15/2013
    wood is 1 month old cedartone decking sold by Menards. This is treated wood with an added color to simulate cedar. Have any advise on using TWP 1500 on this material?
  • We will reply to your comment shortly
    TWP Stains · 06/13/2013
    rsppjwg, you do not need to seal after the stain. Hard to say on the pail as we would need a total sq. footage including the floors, railings, and steps.