TWP 1500 Series Deck Stain - The Best Low VOC Deck Stain

Need Help with your TWP 1500 Stain?

TWP 1500 Stain is a highly rated, EPA registered wood preservative that can be used for all types of exterior wood, siding and decking. TWP 1500 Stain will perform at its maximum potential when the wood is properly prepped and when the stain is properly applied. Unfortunately not all wood is in the same condition prior to applying the stain.

We are here to help with your project!

Please answer these few questions to achieve the best possible results with your TWP 1500 Wood and Decking Stain.

  1. info buttonAge of wood?
  2. Type of wood?
  3. Condition of the wood?
  4. Has it been stained previously and if so with what brand of stain?
  5. Small description of the area to be treated.

Ask Questions in Comment Area Below

Ask a Question or Post a Picture...
You are guest ( Sign Up ? )
or post as a guest
Loading comment... The comment will be refreshed after 00:00.
  • We will reply to your comment shortly
    Rob DellAquila · 09/11/2013
    4 year old pine pergola
    Very good condition
    Mostly greying
    Never been stained or painted
    10'x10'x10' high Pergola covering a 14' circular paver brick patio
  • We will reply to your comment shortly
    Judith Blanton · 09/11/2013
    How can I remove Cabot solid color oil stain? Deck badly cracked and peeling.
  • We will reply to your comment shortly
    TWP Stains · 09/10/2013
    Fran, You can remove most semi-transparent stain with the Restore A Deck Stripper
  • We will reply to your comment shortly
    Fran · 09/10/2013
    Would your answer change if the stain was semi transparent?
  • We will reply to your comment shortly
    TWP Stains · 09/10/2013
    Fran, you cannot apply TWP on an opaque stain and stain stripper will not remove an opaque stain. You will need to sand it all off for the prep. The 1500 does not come in a gray color.
  • We will reply to your comment shortly
    TWP Stains · 09/10/2013
    Doyle, we replied to your questions 3 days ago: http://www.twpstain.com/twp-100-stain
  • We will reply to your comment shortly
    Fran · 09/10/2013
    Cedar deck about 15 years old. Treated w Cabot opaque stain. I have cleaned and sanded deck. Stain areas still remain. Do I still need to strip to use your products? I like to Cape Cod gray in the 100 series but that is not available in the 1500 series. What are my options? I live in PA.
  • We will reply to your comment shortly
    Doyle White · 09/10/2013
    "Second Request" We stained a deck & open Boat House on Lake Jacksonville, TX with TWP1500 and noticed that some areas have a glossy finish after drying. How do we get rid of the glossy finish?

    Doyle White
  • We will reply to your comment shortly
    Larry G Johnson · 09/10/2013
    I just had a 12 ft x 25 ft deck (treated yellow pine) built 1 month ago. I was wanting to stain it with 1500 series (live in Ohio) #1503 (dark oak). Water no longer beads up (Lumber store told me that it can now be stained) but edges are curling up (temp has been in high 80's and 90's last few weeks with minimal rain). I wanted to get your thoughts. If I do stain now, does it need 1 or 2 coats. Does it need treated with anything prior to staining. Deck has not been used yet. Rails are made of Timber Tech (Black with dark brown spindles) so it will not need to be stained. How many gallons of stain do I need
  • We will reply to your comment shortly
    TWP Stains · 09/10/2013
    Eric, please read this: http://www.twpstainhelp.com/prepping-new-wood-for-twp-stains/

    No need to stain all sides.
  • We will reply to your comment shortly
    Eric Chiu · 09/10/2013
    I am working on a new deck. Client is very concern about weatherproof and durability of the deck. Since is a new deck with new wood, do we need to stain all 4 side of the 2x before we install the deck? Or we should put 2 coat first before installation and put a final coat after the installation?
  • We will reply to your comment shortly
    TWP Stains · 09/08/2013
    Dan, I would look at the TWP 100 Series and you can buy from our website.
  • We will reply to your comment shortly
    Fritz Hausmann · 09/08/2013
    just purchased red oak for bed of pickup; wood in perfect condition; not previously stained; 7 boards 6' x6"; what product would be best?
  • We will reply to your comment shortly
    Dan McCue · 09/08/2013
    New porch built last Fall; wood is cedar and Southern Pine
    Stained with AMTECO TWP, Shake & Shingle 205 California Cedar
    Only one coat was applied; I would like to get or put a second coat on, but can't find dealer or that product on your web site.

    It is still protecting and still looks good, but water does not "bubble" up like it used to and wood is slightly fading on surfaces exposed to sunlight.

    Is this product TWP 205 water or spirit based? Is it still available or is there a newer compatible product available?
    Is it available locally - Zip Code is 30152, Kennesaw GA (near Marietta GA
  • We will reply to your comment shortly
    TWP Stains · 09/08/2013
    Diane D, TWP 100 and 1500 are both semi-transparent. No need to do the underside. Please read this about new wood:

    http://www.twpstainhelp.com/prepping-new-wood-for-twp-stains/
  • We will reply to your comment shortly
    TWP Stains · 09/08/2013
    Ted Clark, use a stain stripper when pressure washing and use a wood brightener when done. Try the TWP in the Dark Oak or Pecan.
  • We will reply to your comment shortly
    TWP Stains · 09/08/2013
    Mitch, most likely it will be fine once it dries. I would not do anything.
  • We will reply to your comment shortly
    Mitch Tannenbaum · 09/07/2013
    I stained deck benches with TWP 1500 and it started raining 7 hours ago. What will I need to do after it stops raining relative to staining the benches. Thank you.
  • We will reply to your comment shortly
    Ted Clark · 09/07/2013
    Age: 10 yrs
    Type: Pressure treated
    Condition: Fair - some crackings; some blistering of grain.
    Previous: Semi-transparent oil brand unknown
    Description: Small deck, partial sun; want to pressure wash and then stain with medium brown color.
  • We will reply to your comment shortly
    Diane D · 09/07/2013
    1) New wood-drying for 1 month in garage, spacers & weights are separating the boards
    2) Clear heart redwood
    3) Pristine condition of wood
    5) 260 sq ft deck in Southwest Oregon

    Is 1 month enough drying time for new wood (it was pretty dry when delivered)? Should I stain the underside and sides before installing since the deck joists are only inches above ground level? Is the TWP 100 a solid vs semi-tranparent? I have heard TWP100 might be better but I want the redwood to show through while having UV & moisture protection.