TWP 1500 Series Deck Stain - The Best Low VOC Deck Stain

Need Help with your TWP 1500 Stain?

TWP 1500 Stain is a highly rated, EPA registered wood preservative that can be used for all types of exterior wood, siding and decking. TWP 1500 Stain will perform at its maximum potential when the wood is properly prepped and when the stain is properly applied. Unfortunately not all wood is in the same condition prior to applying the stain.

We are here to help with your project!

Please answer these few questions to achieve the best possible results with your TWP 1500 Wood and Decking Stain.

  1. info buttonAge of wood?
  2. Type of wood?
  3. Condition of the wood?
  4. Has it been stained previously and if so with what brand of stain?
  5. Small description of the area to be treated.

Ask Questions in Comment Area Below

Ask a Question or Post a Picture...
You are guest ( Sign Up ? )
or post as a guest
Loading comment... The comment will be refreshed after 00:00.
  • We will reply to your comment shortly
    TWP Stains · 04/04/2014
    Leon, prep first with the Gemini Restore Kit. Stain with 1 coat since it is newer of the 1500 Series.
  • We will reply to your comment shortly
    Leon Willis · 04/03/2014
    Age: 6 Months
    Treated Pine
    Excellent
    Never had anything applied
    Back deck
  • We will reply to your comment shortly
    TWP Stains · 03/31/2014
    TWP 1500 is not designed for IPE wood. Sorry.
  • We will reply to your comment shortly
    Matt f · 03/31/2014
    5 year old IPE
    pretty good condition, recently sanded
    it is on an exterior deck half sun half shade, located in San Francisco, CA about 5 blocks from the pacific ocean, lots of fog/salt/sun
    shady areas developed mold.
    i'm considering TWP 1516
  • We will reply to your comment shortly
    TWP Stains · 03/31/2014
    auty, you will need to remove all of the old coatings for the TWP to work correctly. Use a stain stripper and or sanding for this. Brighten the wood when done. Use the 1500 Series for this.
  • We will reply to your comment shortly
    auty morrissey · 03/31/2014
    1.Age of wood?
    6 years
    2.Type of wood?
    PT
    3.Condition of the wood?
    Fair some cracking or drying visible.Due to high Sun exposure
    4. Has it been stained previously and if so with what brand of stain?
    Olympic in some area's Behr in others
    5.Small description of the area to be treated.
    Stairs and siding
  • We will reply to your comment shortly
    TWP Stains · 03/30/2014
    Jim, TWP does not come in a solid stain. Only semi-transparent. You should prep with the Gemini Restore Kit after sanding. Two light coats wet on wet and you would need about 10-12 gallons for 1185 sq. feet. We can ship to you from this website.
  • We will reply to your comment shortly
    Jim Testa · 03/29/2014
    My home is in San Diego Ca, I have a large exterior wood deck about 10 years old. My contractor has just sanded it down to the bare wood removing an industrial grade material that was rolled on with a heavy rough coat. That product almost right after being applied as per the instructions began to develop blisters throughout the deck. That resulted in a settlement from the manufacturer. I have done a lot of research and your product seems to be the best. The wood is in good shape and the prep is thorough. Should we prime it before putting down TWP 1500, how many coats, price? I have approx 1185 sq ft to cover. I'm thinking a solid stain given prior product on the deck. And, finally where can I buy in the San Diego area.
    Thanks
  • We will reply to your comment shortly
    TWP Stains · 03/25/2014
    I A Rumble, you should not apply TWP on top of another brand of gray stain. You would want to remove it first by stripping or sanding the wood. Once done, apply wood brightener. Stain with the 1500 after the prep. We sell online.
  • We will reply to your comment shortly
    TWP Stains · 03/25/2014
    Chuck, you cannot apply a spar varnish on top of TWP.
  • We will reply to your comment shortly
    I A Rumble · 03/25/2014
    Wood is probably 15 year treated pine in worn condition. Previously stained grey. Need to do 100s of square feet of decking. Need to know what stain you would recommend, cost and if available in sores or only online.
  • We will reply to your comment shortly
    chuck dorsey · 03/25/2014
    Hi, last summer I purchased from you TWP 1500 to protect my new cedar deck - it worked great and looks great. My question: I am building a new screen door out of cedar and have stained it with TWP 1500. Can I apply spar varnish over TWP? I asume I can but want to check first.
  • We will reply to your comment shortly
    TWP Stains · 03/24/2014
    Tom Camp, you can wait a maximum of two weeks after prepping, before staining.
  • We will reply to your comment shortly
    Tom Camp · 03/24/2014
    I have a 12x8 deck & a 8x8 pool deck almost 1 yr old, salt treated pine? wood in full sun already showing wear. It is untreated, if prepped according to instructions, how long can you leave the area before getting it stained? I have a sample of the redwood stain for the twp 1500 stain, just tried it today.
  • We will reply to your comment shortly
    TWP Stains · 03/23/2014
    Natef, you can get the amount of product needed by using the calculator on the right. For your area (NC) you can use either the 1500 and 100 Series. Most use the 100 series there.
  • We will reply to your comment shortly
    TWP Stains · 03/23/2014
    Yes that is correct. Prep first with Gemini Restore Kit.
  • We will reply to your comment shortly
    Vicki Barton · 03/22/2014
    We applied 2 coats of TWP 1502 a year ago, I understand that we should apply 1 more coat this year. Is this correct?
  • We will reply to your comment shortly
    Natef · 03/21/2014
    I have a pressure treated pine/hemlock wood deck. It is made of decking material. We allowed it to weather and dry for 9 months. The wood is in excellent condition. it has colored slightly. It has never been stained. It is 20X30 ft.
    What do i need to order for my project? DO I need the 100 series or the 1500 series. I want an oil stain that durable to wear and tear and the sun. i live in NC
    Please advise. Thank you!
    Nathan Frazier
  • We will reply to your comment shortly
    TWP Stains · 03/20/2014
    Prep the wood to remove the mill glaze with the Gemini Restore Kit. Stain with the TWP 1503 Dark Oak if looking for a dark color.
  • We will reply to your comment shortly
    Eric M. · 03/20/2014
    I purchased a new cypress porch swing and outdoor furniture that will have some exposure to weathering (sunlight, rain, etc.). I would like to apply a stain to obtain a darker color than the natural cypress while still preserving the look of the wood grain (darkest possible), and if needed, coating with something to protect from the elements (South Louisiana). Which of your products would you recommend to complete this task? And any suggestions or recommendations for application would be greatly appreciated.