TWP 1500 Series Deck Stain - The Best Low VOC Deck Stain

Need Help with your TWP 1500 Stain?

TWP 1500 Stain is a highly rated, EPA registered wood preservative that can be used for all types of exterior wood, siding and decking. TWP 1500 Stain will perform at its maximum potential when the wood is properly prepped and when the stain is properly applied. Unfortunately not all wood is in the same condition prior to applying the stain.

We are here to help with your project!

Please answer these few questions to achieve the best possible results with your TWP 1500 Wood and Decking Stain.

  1. info buttonAge of wood?
  2. Type of wood?
  3. Condition of the wood?
  4. Has it been stained previously and if so with what brand of stain?
  5. Small description of the area to be treated.

Ask Questions in Comment Area Below

Ask a Question or Post a Picture...
You are guest ( Sign Up ? )
or post as a guest
Loading comment... The comment will be refreshed after 00:00.
  • We will reply to your comment shortly
    Stephen C Stern · 09/09/2015
    I have a 10 year old mahogany deck that had been treated with various products, including poly. In order to get down to the bare wood it was sanded multiple times as well as power washed and bleached. There is still remnants of old color. We are in western Mass, winters harsh. I do want some pigment, but want the grain to come through. What product do you reccomend?
  • We will reply to your comment shortly
    TWP Stains · 09/04/2015
    Al P:
    We have a 30 year old deck, pressure treated (pine?) never stained. It is old ,grey, weathered but in good condition. Pressure washed it a year ago, want to use TWP1500 stain. Thinking of using orbital sander with 60 grit and then wash before staining. What prep would you advise?
    Thank you.

    The prep you have will work but make sure to lightly clean and brighten after the sanding.
  • We will reply to your comment shortly
    Al P · 09/04/2015
    We have a 30 year old deck, pressure treated (pine?) never stained. It is old ,grey, weathered but in good condition. Pressure washed it a year ago, want to use TWP1500 stain. Thinking of using orbital sander with 60 grit and then wash before staining. What prep would you advise?
    Thank you.
  • We will reply to your comment shortly
    TWP Stains · 09/03/2015
    Adele:
    Got started using Arborcoat cedar oil translucent stain. Looks good, taking well even over mixed brands of stains used over the years on new and old decks, siding & trim. Today's project: New deck boards, left untreated for 2 weeks, then lightly stained. Read your excellent reviews so I'm thinking of changing to your brand for the second coat and full treatment over the 30-year old cedar house. (Last full treatment on 2,000 sf house 10 years ago, with retouching feathered in on sun exposed areas) Should I let new deck weather over the winter before doing second coat? Arborcoat looks acceptable but your product is better rated. Test coats show house seems to take oil-based stain quite well, even though some areas appear to have had a previous water-based coat-- well worn, acceptable, rich varied look.

    Adele, you cannot apply the TWP over a stain of a different brand without removing the coating fully first. See here as well about new wood:
    http://www.twpstainhelp.com/prepping-new-wood-for-twp-stains/
  • We will reply to your comment shortly
    Adele · 09/02/2015
    Got started using Arborcoat cedar oil translucent stain. Looks good, taking well even over mixed brands of stains used over the years on new and old decks, siding & trim. Today's project: New deck boards, left untreated for 2 weeks, then lightly stained. Read your excellent reviews so I'm thinking of changing to your brand for the second coat and full treatment over the 30-year old cedar house. (Last full treatment on 2,000 sf house 10 years ago, with retouching feathered in on sun exposed areas) Should I let new deck weather over the winter before doing second coat? Arborcoat looks acceptable but your product is better rated. Test coats show house seems to take oil-based stain quite well, even though some areas appear to have had a previous water-based coat-- well worn, acceptable, rich varied look.
  • We will reply to your comment shortly
    TWP Stains · 08/27/2015
    Cindy Bertinetti:
    We are getting ready to stain a large cedar deck. We have let it age and weather four months and used the recommended cleaner and brightener. It was a very big job to apply those products, but it is done and ready to stain.

    Our question is what happens after this in several years when it is ready to stain again. The can says it needs to be stripped...do we really need to do that to reuse the same product? I thought we would go through a similar cleaning and power wash steps maximum.

    Advice? We are waiting to stain until we know what we will be in for in the future.

    You can use the same Gemini Restore Kit for reapplying with TWP. One coat and read this article on new wood:
    http://www.twpstainhelp.com/prepping-new-wood-for-twp-stains/
  • We will reply to your comment shortly
    Cindy Bertinetti · 08/27/2015
    For the job below, new red cedar wood, four months old, cleaned and brightened, should we apply one or two coats?
  • We will reply to your comment shortly
    Cindy Bertinetti · 08/27/2015
    We are getting ready to stain a large cedar deck. We have let it age and weather four months and used the recommended cleaner and brightener. It was a very big job to apply those products, but it is done and ready to stain.

    Our question is what happens after this in several years when it is ready to stain again. The can says it needs to be stripped...do we really need to do that to reuse the same product? I thought we would go through a similar cleaning and power wash steps maximum.

    Advice? We are waiting to stain until we know what we will be in for in the future.
  • We will reply to your comment shortly
    TWP Stains · 08/27/2015
    David Hannan:
    4 months cedar deck, was sanded at install but some looks like rough cut now and some has a grey looking film now, new wood sanded after install, new deck...everything except deck floor (steps, railing, posts)

    Prep with the Gemini Restore Kit. Do not sand anymore. Apply one light coat this fall.
  • We will reply to your comment shortly
    David Hannan · 08/26/2015
    4 months cedar deck, was sanded at install but some looks like rough cut now and some has a grey looking film now, new wood sanded after install, new deck...everything except deck floor (steps, railing, posts)
  • We will reply to your comment shortly
    TWP Stains · 08/26/2015
    Connie Baker:
    15years, redwood,god to fair previous stain super deck large 20x20 with 5 stairs, 19x12 with 4x16 walkway then 5 stairs, 8x13 with 6x6platform and two 2x6 stair step downs then a 6x4 step out with 2x6 stair and a 6x4 porch. Also vertical siding 3x20, 20x4 and siding measuring approx 9x16, 9x10, 9x14.estimate how much needed and shipping costs.

    Please send us a total sq. footage of all wood added together. Add flooring, stairs, railings, etc. We do have a calculator here if it helps: http://www.twpstain.com/twp-deck-stain-calculator
  • We will reply to your comment shortly
    Connie Baker · 08/25/2015
    15years, redwood,god to fair previous stain super deck large 20x20 with 5 stairs, 19x12 with 4x16 walkway then 5 stairs, 8x13 with 6x6platform and two 2x6 stair step downs then a 6x4 step out with 2x6 stair and a 6x4 porch. Also vertical siding 3x20, 20x4 and siding measuring approx 9x16, 9x10, 9x14.estimate how much needed and shipping costs.
  • We will reply to your comment shortly
    TWP Stains · 08/23/2015
    Susane:
    9 month
    Cedar
    New
    Not treated
    Deck

    Hi, I cleaned and brightened the deck a week ago. No rain until application. Yesterday evening I applied one coat twp1500 with a brush. Before finishing it up for the day, used dry cloth over the complete deck to take off stain which was sitting on top as good as possible. This morning, 8 hours later, still a greasy shine on the deck,
    What can I do? Shall try to get it off with a dry cloth again?

    It will cure and dry but of you want to speed up the process then yes you can wipe off any excess stain that did not penetrate. Make sure to saturate any oily rags in water and lay flat to dry.
  • We will reply to your comment shortly
    Susane · 08/22/2015
    9 month
    Cedar
    New
    Not treated
    Deck

    Hi, I cleaned and brightened the deck a week ago. No rain until application. Yesterday evening I applied one coat twp1500 with a brush. Before finishing it up for the day, used dry cloth over the complete deck to take off stain which was sitting on top as good as possible. This morning, 8 hours later, still a greasy shine on the deck,
    What can I do? Shall try to get it off with a dry cloth again?
  • We will reply to your comment shortly
    TWP Stains · 08/22/2015
    Ryan Young:
    What moisture reading can I stain?
    New deck, #1 pressure treated, first application, only deck boards

    Deck was installed one mnth ago

    You cannot stain a one month old deck with TWP. Please read this:

    http://www.twpstainhelp.com/prepping-new-wood-for-twp-stains/
  • We will reply to your comment shortly
    Ryan Young · 08/21/2015
    What moisture reading can I stain?
    New deck, #1 pressure treated, first application, only deck boards

    Deck was installed one mnth ago
  • We will reply to your comment shortly
    TWP Stains · 08/21/2015
    Margo:
    1. 16 years
    2. pressure treated
    3. worn, some cracks
    4. yes, Cabot as the last time, about 4 years ago
    5. huge deck around most of the house.

    Prep first by removing the Cabot with the Restore A Deck Stain Stripper. Pressure wash off the stripper then brighten with the RAD Wood Brightener. Once all the Cabot is removed you can apply the TWP.
  • We will reply to your comment shortly
    Margo · 08/20/2015
    1. 16 years
    2. pressure treated
    3. worn, some cracks
    4. yes, Cabot as the last time, about 4 years ago
    5. huge deck around most of the house.
  • We will reply to your comment shortly
    TWP Stains · 08/20/2015
    Andrew Scott:
    Looking to stain outside house siding in Maine. Wood is 9 years old, pine, and never stained. Some of house is shaded and some gets direct sun in parts of day. The parts that get direct sun having some graying and some boards look to have slight bowing. Would like stain to last more than 2 years since a big job to do whole house and deck. Recommendations?

    Use the TWP 1500 Series. In most cases you will get 3-6 years on vertical siding depending on the UV exposure and the color your choose. Prep all wood first with the Gemini Restoration Kit.
  • We will reply to your comment shortly
    Andrew Scott · 08/20/2015
    Looking to stain outside house siding in Maine. Wood is 9 years old, pine, and never stained. Some of house is shaded and some gets direct sun in parts of day. The parts that get direct sun having some graying and some boards look to have slight bowing. Would like stain to last more than 2 years since a big job to do whole house and deck. Recommendations?