TWP 100 Series Deck Stain - The Best Deck Stain

TWP 100 StainNeed Help or Advice when using TWP 100 Stain?

Total Wood Preservative (TWP) Wood Deck Stain protects and prolongs all exterior woods, decks, and fences. TWP Wood Deck Stains and Sealers is a distinctive mixture of chemicals blended together to form a professional strength formula that preserves exterior wood surfaces in numerous ways. 

TWP 100 Series Stain will perform at its maximum potential when the wood is properly prepped and when the stain is properly applied. Unfortunately not all wood is in the same condition prior to applying the stain.

 

Do you have any questions about using the TWP 100 Wood and Deck Stain?

Please answer these few questions to achieve the best possible results with your TWP 100 Wood and Decking Stain.

  1. info buttonAge of wood?
  2. Type of wood?
  3. Condition of the wood?
  4. Has it been stained previously and if so with what brand of stain?
  5. Small description of the area to be treated.

Ask Questions in Comment Area Below

Ask a Question or Post a Picture...
You are guest ( Sign Up ? )
or post as a guest
Loading comment... The comment will be refreshed after 00:00.
  • We will reply to your comment shortly
    TWP Stains · 04/15/2013
    The lightest tint in either series is the Honeytone. Clears will not give UV protection from graying. I would personally use the 1515 Honeytone after proper cleaning.
  • We will reply to your comment shortly
    matthew herndon · 04/15/2013
    I have a one year old treated pine deck about 450 square feet in north alabama. It has faded to a nice color and is in good condition. I have waited a year to look into staining and need help deciding on a color and brand of stain. I want as close to natural as I can find. any suggestions??
  • We will reply to your comment shortly
    TWP Stains · 04/12/2013
    Brenda, you cannot put TWP on top of a failing stain and expect it to perform correctly. You must remove the old stain first.
  • We will reply to your comment shortly
    TWP Stains · 04/12/2013
    Colin, 2 Gallons for 1 coat. 3 gallons of doing the 2 coats wet on wet. Rough fence wood is more absorbent and the stain does not spread as far.
  • We will reply to your comment shortly
    Brenda Bedenbaugh · 04/11/2013
    I am restaining a deck around a pool. It is pressure treated wood and we used a 3 year stain from Lowe's 2 years ago. The stain did not stand up well to our hot summers. Can we use the 100 or 1500 series over the old stain and sealer?
  • We will reply to your comment shortly
    Colin McArthur · 04/11/2013
    Small fence at both ends between adjoining home. Roughly 10' X 5 (X2) or 200 sq. ft (if both sides sq. footage counted separately). Fence is 3 months old, mostly cedar with pressure treated 4x4 posts. Not stained previously. I suspect 1 gal will do it or would you recommend 2 gallons?
  • We will reply to your comment shortly
    TWP Stains · 04/07/2013
    Howard, Prep with the Gemini Restore Kit first. Without knowing the exact sq. footage it is hard to give an accurate amount. I would think you would need about 5-7 gallons for the 1 coat on the new wood.

    Any color will work. That is up to your preference.
  • We will reply to your comment shortly
    Howard · 04/07/2013
    Age: New (dried out for a few months)
    Type: Pressure Treated Pine
    Condition: New
    No previous coating.
    Single level deck 10'x20'; 5 steps; 30" high x 30' of lattice around deck.
    Please recommended gallons and color. My deck in north FL, morning and early afternoon sun.
    Thank you.
  • We will reply to your comment shortly
    TWP Stains · 04/07/2013
    Audrey, please read this:

    http://www.twpstainhelp.com/prepping-new-wood-for-twp-stains/
  • We will reply to your comment shortly
    TWP Stains · 04/07/2013
    Rosie, the Honeytone is a golden color. That may work. Have you read this about staining new decks:

    http://www.twpstainhelp.com/prepping-new-wood-for-twp-stains/
  • We will reply to your comment shortly
    Andrey · 04/06/2013
    How long do I need to wait until staining a new smooth cedar fence?
  • We will reply to your comment shortly
    Rosie · 04/06/2013
    What is a good NATURAL color to stain for the first time on pressure treated wood. We did another deck on another area of our property and it was too orange.(with another product)
    What color do you recommend that is NOT orange, gray or too dark in the 100 series line? ...just natural looking.
    Thanx.
  • We will reply to your comment shortly
    TWP Stains · 03/30/2013
    You can use TWP again. I would use the Gemini Restore Kit to prep after the sanding. This will remove sand dust and allow the stain to penetrate better.
  • We will reply to your comment shortly
    dan oshreve · 03/29/2013
    I'v already sanded 10 yr old cedar deck with 80 grit paper. Previously used twp. Can I now use twp again? Should I wait. Is there any other prep necessary?
  • We will reply to your comment shortly
    TWP Stains · 03/26/2013
    Diane, new wood needs to weather and then prepped properly. Please read this article:

    http://www.twpstainhelp.com/prepping-new-wood-for-twp-stains/

    I would go with the 100 Series
  • We will reply to your comment shortly
    TWP Stains · 03/26/2013
    Russel, the stripper and brightener will prep well but it may not remove all the oil and grease completely as that has penetrated deep into the wood.
  • We will reply to your comment shortly
    Diane Barron · 03/26/2013
    new red cedar wood
    not previously stained
    Live in St Louis Mo. so both 100 and 1500 are allowed
    Full sun facing west
    Building a pergola.
    Which product the 100 or 1500 do you recommend.
  • We will reply to your comment shortly
    Russell w · 03/26/2013
    Thanks for the quick response. I just want to make sure you know that the reason I am wanting to stain the wood is because it very dirty looking. I have black spots (from BBQ pit, etc) all over the wood. I sprayed some spray and forget stuff and it was useless. I tested a spot with outdoor bleach and the black stuff came up after some serious scrubbing. So do you still say just use brightener after the sealer remover stuff?
  • We will reply to your comment shortly
    TWP Stains · 03/26/2013
    You would want to remove the TWP with a stain stripper before applying a paint.
  • We will reply to your comment shortly
    TWP Stains · 03/26/2013
    Russell, to prep you would want a stripper and a brightener. You do not need the cleaner. No need nor can you put a sealer on top of TWP.