TWP 100 Series Deck Stain - The Best Deck Stain

TWP 100 StainNeed Help or Advice when using TWP 100 Stain?

Total Wood Preservative (TWP) Wood Deck Stain protects and prolongs all exterior woods, decks, and fences. TWP Wood Deck Stains and Sealers is a distinctive mixture of chemicals blended together to form a professional strength formula that preserves exterior wood surfaces in numerous ways. 

TWP 100 Series Stain will perform at its maximum potential when the wood is properly prepped and when the stain is properly applied. Unfortunately not all wood is in the same condition prior to applying the stain.

 

Do you have any questions about using the TWP 100 Wood and Deck Stain?

Please answer these few questions to achieve the best possible results with your TWP 100 Wood and Decking Stain.

  1. info buttonAge of wood?
  2. Type of wood?
  3. Condition of the wood?
  4. Has it been stained previously and if so with what brand of stain?
  5. Small description of the area to be treated.

Ask Questions in Comment Area Below

Ask a Question or Post a Picture...
You are guest ( Sign Up ? )
or post as a guest
Loading comment... The comment will be refreshed after 00:00.
  • We will reply to your comment shortly
    Mike Chu · 07/20/2013
    Age: 6 years
    Type of Wood: Pressured Pine
    Condition: normal
    It had been painted using Behr deck paint
    It is a deck under full sun in MN
  • We will reply to your comment shortly
    TWP Stains · 07/20/2013
    Joe O, 7 gallons for 2 coats of the TWP. Shipping to WI takes about 2-3 days.
  • We will reply to your comment shortly
    Joe Ostervich · 07/19/2013
    15 year old pressure treated southern yellow pine deck in western wisconsin, very grey and never been stained.
    I will chemically clean and pressure wash to prep.
    600 sq ft decking, 60 sq ft railing.
    Need to know # of gallons needed of TWP 100. Also, what is delivery time after placing order?
  • We will reply to your comment shortly
    TWP Stains · 07/17/2013
    The 1500 has a higher solid content. The 100 dries a little faster. Otherwise they look similar and perform about the same.
  • We will reply to your comment shortly
    stewie4911 · 07/17/2013
    Hi,

    What is the difference between the twp100 and twp1500 besides the VOC compliant in the twp1500.

    Thanks.
  • We will reply to your comment shortly
    TWP Stains · 07/15/2013
    tavery, you can order the Restore A Deck Stripper and the Restore A Deck Brightener separately. You do not need the cleaner if using the stripper.
  • We will reply to your comment shortly
    TWP Stains · 07/15/2013
    JoeC, the 200 series is for shakes and shingles. It can be applied to a deck but it will take days or even weeks to fully cure. Please read this about new decking:

    http://www.twpstainhelp.com/prepping-new-wood-for-twp-stains/
  • We will reply to your comment shortly
    Tavery · 07/15/2013
    any pics of the stain colors actually on a deck? say, over ptp?
  • We will reply to your comment shortly
    Tavery · 07/15/2013
    working on 6 year old PTpine, it has something transparent on it, problably a water shield product of some sort. hard to get off.
    Planning to sand with 60 grit on random orbital.
    then stipping
    then brightening
    then staining with TWP 100
    problem is I don't see needing the cleaner in the 'kit'
    I planned on the stripper just in case I missed some sealer with the sanding( large deck) lots of spindles.
    Then brightener. Have powerwashed it last fall not gottenaround to getting this done till now so wood is pretty dry.
  • We will reply to your comment shortly
    JoeC · 07/15/2013
    My contractor wants to use TWP200 series for my new KDAT PT Pine deck but all my reasearch says TWP 100 is for decks and 200 is for shingles. Should I force him to use TWP 116 vs TWP 206 or 207 for a pine kild dried pressure treated deck?
  • We will reply to your comment shortly
    TWP Stains · 07/15/2013
    John, you cannot use the 100 Series in Maine but you can use the 1500 Series and would work great for your log home. Any high quality caulk should be fine.
  • We will reply to your comment shortly
    John Bielat · 07/15/2013
    I have a new ceder log home in Maine with some graying, mildew spots on logs. The logs have never been treated. Is Twp 100 a good choice for log walls. What caulking would be compatible. We will be caulking a matching color between all logs. Thanks, John
  • We will reply to your comment shortly
    TWP Stains · 07/14/2013
    BrandonGA, sorry I read 450 not 2450. 3 Kits and 20-25 gallons of stain.
  • We will reply to your comment shortly
    BrandonInGA · 07/13/2013
    Only 1 Kit and 5 gallons for 2,450 square feet of fence surface? I was thinking I'd need 3 Kits and 15-20 gallons.
  • We will reply to your comment shortly
    TWP Stains · 07/13/2013
    BrandonInGA, one RAD Kit and one 5 gallon pail of stain.
  • We will reply to your comment shortly
    TWP Stains · 07/13/2013
    Johnny Walker, please read this article: http://www.twpstainhelp.com/prepping-new-wood-for-twp-stains/
  • We will reply to your comment shortly
    BrandonInGA · 07/13/2013
    1) Three years.
    2) Pine.
    3) Graying.
    4) Never stained.
    5)
    2,450 total surface square feet (fence interior + fence exterior) in Georgia. I plan to use TWP 100 in Pecan. How many Restore-A-Deck Kits and how many gallons of stain do you recommend for best results with this task?
  • We will reply to your comment shortly
    John Walker · 07/13/2013
    Wood is new. 3 months
    Pine
    Condition is good
    no previous stain
    200 square ft deck area under awning
    200 sq ft near a pool and exposed to the elements.
  • We will reply to your comment shortly
    TWP Stains · 07/12/2013
    Dennis, the Gemini Restore Kit with a light pressure washing for the prep.
  • We will reply to your comment shortly
    Dennis Stanchfield · 07/11/2013
    Wood is approximately 13 years old, cedar shake siding and cedar lap siding. The wood is in fairly good condition. This wood was stained with TWP in 2001, prior to installation. This is cedar shingle and lap siding.

    What's a good preparation procedure for re-coating with TWP?