TWP 100 Series Deck Stain - The Best Deck Stain

TWP 100 StainNeed Help or Advice when using TWP 100 Stain?

Total Wood Preservative (TWP) Wood Deck Stain protects and prolongs all exterior woods, decks, and fences. TWP Wood Deck Stains and Sealers is a distinctive mixture of chemicals blended together to form a professional strength formula that preserves exterior wood surfaces in numerous ways. 

TWP 100 Series Stain will perform at its maximum potential when the wood is properly prepped and when the stain is properly applied. Unfortunately not all wood is in the same condition prior to applying the stain.

 

Do you have any questions about using the TWP 100 Wood and Deck Stain?

Please answer these few questions to achieve the best possible results with your TWP 100 Wood and Decking Stain.

  1. info buttonAge of wood?
  2. Type of wood?
  3. Condition of the wood?
  4. Has it been stained previously and if so with what brand of stain?
  5. Small description of the area to be treated.

Ask Questions in Comment Area Below

Ask a Question or Post a Picture...
You are guest ( Sign Up ? )
or post as a guest
Loading comment... The comment will be refreshed after 00:00.
  • We will reply to your comment shortly
    TWP Stains · 10/03/2013
    Larry, please read this about new wood: http://www.twpstainhelp.com/prepping-new-wood-for-twp-stains/
  • We will reply to your comment shortly
    Drew · 10/02/2013
    I have a pine fence that is 3-4 months old - it should be dry. What kind of application method should I use and how many coats do I need? I put down some dirt (river silt) for new grass in my yard which has splashed up on the fence with rain/watering. I was thinking it could simply be brushed off with a broom - will this be sufficient? I live in south Louisiana, so it is hot and humid much of the year. Also, the fence is about 315 feet with about 100 feet being 8 feet tall (rest is 6 feet tall) - how many 5 gal pales do I need?
  • We will reply to your comment shortly
    George Miller · 10/02/2013
    I applied your product TWP 101 last September and it is peeling in spots. How do I prep to recoat?
  • We will reply to your comment shortly
    larry watrous · 10/02/2013
    New deck. Some rough cedar, some treated pine, some previously treated rough cedar. What do you recommend?
  • We will reply to your comment shortly
    TWP Stains · 10/01/2013
    Rick, prep first with the Gemini Restore kit and stain with either the 100 or 1500. Use stain pads for application.
  • We will reply to your comment shortly
    TWP Stains · 10/01/2013
    Hans, new wood should weather for a few months, even kiln dried. Samples can be bought from our website. Pricing is on the website as well. I would use the 100 if allowed in your state. I can be used on new and older wood.
  • We will reply to your comment shortly
    Hans Nieuwold · 09/30/2013
    I have a brand new deck and stairs constructed of number 1 kiln-dried lumber. I also have a deck that is 18 years old, gray colored, but in excellent condition (covered balcony of 200 sq. ft on third level). Should I use series 100, series 1500 or can I use either series on new as well as properly prepped aged wood?
    What stripper, reconditioned should I use on the aged wood?
    I plan to just power wash the new wood. I figure I need 15 gallon of stain. Do you have color samples that I can see?
    Please provide advice and information on pricing. I am under some time constraints thus I hope that you can respond to this note soon.
    Regards,

    Hans R Nieuwold
  • We will reply to your comment shortly
    Rick Davies · 09/30/2013
    The deck i want to treat is 5 years old. It is pressure treated pine. The wood is sun bleached and dry, The overall condition of the deck is good. The deck itself is about 700 square feet not including rail and handholds attached to deck surface. What is the best product for me? I am dissabled so i need to best type of application instructions taking this into account.

    Thank you.
  • We will reply to your comment shortly
    TWP Stains · 09/30/2013
    TWP is not a covering stain but an enhancing stain. It may darken it so it does not stand out. Try heavy rinsing to remove the excess pulp.
  • We will reply to your comment shortly
    Scott Baldassari · 09/30/2013
    I am attempting to clean and stain 3 buildings and decks. Two buildings are grayed T-11 siding (fir?), and one is board and batten rough sawn pine (I think). I think cuprinol was used 10+ years ago. When I bleach and pressure wash, a sort of white "pulp" seems to "grow" out of the wood. The color of the T-11 comes back somewhat, but bleaching makes the pine turn an ugly white/green color. The wood hasn't dried out yet to test color and adhesion, but I am wondering if TWP Cedartone will "cover" this white... Also, what do I need to do with this "pulp"? It will brush off with a coarse brush... But I have 3 complete buildings...
  • We will reply to your comment shortly
    TWP Stains · 09/27/2013
    thomas w, TWP 200 is for shakes and shingles. Please read this about new decks:

    http://www.twpstainhelp.com/prepping-new-wood-for-twp-stains/
  • We will reply to your comment shortly
    thomas w · 09/27/2013
    I have a bran new deck with pressure treaded lumber can i use the twp 200 or will that not work. it has not been stained before
  • We will reply to your comment shortly
    TWP Stains · 09/27/2013
    Matt 66, We can do that but there is no difference on color between batches. Quality control is excellent!
  • We will reply to your comment shortly
    Matt 66 · 09/27/2013
    would like to order 2 of the Gemini wood prep kits as well as 3 5 gallon buckets of TWP honey tone. Would first like to verify that you can send me 3 5 gallon buckets with matching batch numbers so the color of the stain is consistent on the deck.
  • We will reply to your comment shortly
    TWP Stains · 09/26/2013
    Brandon, the 1500 Series.
  • We will reply to your comment shortly
    Brandon dye · 09/25/2013
    I'm trying to figure out which of your stains to use on a cedar fence that has been in place for about 6 months. as with most fences it receives full sun. the summer here in missouri has been fairly hot so it should be quite dry by this time..
  • We will reply to your comment shortly
    TWP Stains · 09/24/2013
    Mike, you could use either. I would look at the 100 Series.
  • We will reply to your comment shortly
    TWP Stains · 09/23/2013
    HL Manning, 4 months should be good.
  • We will reply to your comment shortly
    H L Manning · 09/23/2013
    Western Cedar fencing 160 ft. installed in spring been 5 months. TWP-100 can says wait 6-12 months. I was thinking you said previously 4 mo. was long enough. Just wondering should we wait another month or two?
  • We will reply to your comment shortly
    TWP Stains · 09/23/2013
    Ana, TWP 100 Series.