TWP 100 Series Deck Stain - The Best Deck Stain

TWP 100 StainNeed Help or Advice when using TWP 100 Stain?

TWP 100 Series Total Wood Protectant (TWP) Wood Deck Stain protects and prolongs all exterior woods, decks, and fences. TWP Wood Deck Stains and Sealers is a distinctive mixture of chemicals blended together to form a professional strength formula that preserves exterior wood surfaces in numerous ways. 

TWP 100 Series Stain will perform at its maximum potential when the wood is properly prepped and when the stain is properly applied. Unfortunately not all wood is in the same condition prior to applying the stain.

Order Now: TWP 100 Series

Do you have any questions about using the TWP 100 Wood and Deck Stain?

Please answer these few questions to achieve the best possible results with your TWP 100 Wood and Decking Stain.

  1. info buttonAge of wood?
  2. Type of wood?
  3. Condition of the wood?
  4. Has it been stained previously and if so with what brand of stain?
  5. Small description of the area to be treated.

Ask Questions in Comment Area Below

Ask a Question or Post a Picture...
You are guest ( Sign Up ? )
or post as a guest
Loading comment... The comment will be refreshed after 00:00.
  • We will reply to your comment shortly
    Les Balantine · 07/29/2015
    Is CWT100 legal in WA state? I am completely sanding my deck with a 12x18 walk behind sander. How many coats would be required? Thank you.
  • We will reply to your comment shortly
    TWP Stains · 07/28/2015
    steve farb:
    I want to stain my 3 rail fence.
    It has 30 x 10' rails, 11 post, & 2/4' gates. The rails are different age & need to be cleaned. How much stain do I need? Do you have a cleaning agent? Can I spray the fence or use a brush?
    Thx, Steve

    Steve, please supply us with a total sq. footage of all wood that is to be stained. it is not spoonbill for us to determine this on the amounts you supplied. Yes we have a prepping product:

    http://www.twpstain.com/gemini-s-restore-a-deck-cleaner-and-brightener-kit
  • We will reply to your comment shortly
    steve farb · 07/28/2015
    I want to stain my 3 rail fence.
    It has 30 x 10' rails, 11 post, & 2/4' gates. The rails are different age & need to be cleaned. How much stain do I need? Do you have a cleaning agent? Can I spray the fence or use a brush?
    Thx, Steve
  • We will reply to your comment shortly
    TWP Stains · 07/28/2015
    philip mcbride:
    I have a redwood deck, new this year and applied 2 coats after aging the surface. The redwood absorbed both coats with no problems other than aesthetics. Three months later I applied a coat in hopes that it would become glossy and even. The problem that I have is that it is peeling off and easily scraped. It is possible that I applied the TWP to thick. This application does not seem that it is totally dried, and it has been 2 weeks in 80+ temperatures. How do I treat the peeling areas? How can I repair these areas. Thank you.

    You did many things incorrectly. First new wood needs to age 4-12 months and prepped first properly. In addition only one coat is suggested for new wood. TWP also is a penetrating stain and it not supposed to be shiny. Shiny means you excessively over applied and the TWP "filmed" on the surface. When the stain is over applied, it will fail. The only thing you can do is remove it all and start over. Please read this about new wood: http://www.twpstainhelp.com/prepping-new-wood-for-twp-stains/
  • We will reply to your comment shortly
    philip mcbride · 07/28/2015
    I have a redwood deck, new this year and applied 2 coats after aging the surface. The redwood absorbed both coats with no problems other than aesthetics. Three months later I applied a coat in hopes that it would become glossy and even. The problem that I have is that it is peeling off and easily scraped. It is possible that I applied the TWP to thick. This application does not seem that it is totally dried, and it has been 2 weeks in 80+ temperatures. How do I treat the peeling areas? How can I repair these areas. Thank you.
  • We will reply to your comment shortly
    TWP Stains · 07/26/2015
    Michele Morrow:
    20 years
    Pressure treated decking and fence.
    good condition/stained and treated.
    Elevated covered deck with stairs and railing(10x12, 13 stairs)

    fence in fair condition but has never been stained or treated. fence is about 140 yards total

    Prep the fence with the Gemini Restore Kit first. The deck if still has an older stain will need to be stripped with the Restore A Deck Stripper. Brighten after.
  • We will reply to your comment shortly
    Michele Morrow · 07/25/2015
    20 years
    Pressure treated decking and fence.
    good condition/stained and treated.
    Elevated covered deck with stairs and railing(10x12, 13 stairs)

    fence in fair condition but has never been stained or treated. fence is about 140 yards total
  • We will reply to your comment shortly
    TWP Stains · 07/22/2015
    Bill Schueneman:
    New Wood / Pressure treated decking / New condition / never been staines / 12' x 24' deck / no railings / 12 inches off the ground / sides have same decking material

    Hello, please read:
    http://www.twpstainhelp.com/prepping-new-wood-for-twp-stains/
  • We will reply to your comment shortly
    Bill Schueneman · 07/22/2015
    New Wood / Pressure treated decking / New condition / never been staines / 12' x 24' deck / no railings / 12 inches off the ground / sides have same decking material
  • We will reply to your comment shortly
    TWP Stains · 07/19/2015
    Martin W Holden:
    25 year old cedar deck, good condition, Thompson water seal, followed by Beher semi, then Behr Solild, none held up. Now stripping deck to bare wood and wanting to restain. Located in Wisconsin.

    You must remove all of the Behr solid stain if you want to use the TWP and that will require sanding it off as s tripper will not remove it completely.
  • We will reply to your comment shortly
    Martin W Holden · 07/17/2015
    25 year old cedar deck, good condition, Thompson water seal, followed by Beher semi, then Behr Solild, none held up. Now stripping deck to bare wood and wanting to restain. Located in Wisconsin.
  • We will reply to your comment shortly
    TWP Stains · 07/16/2015
    Harry Jones:
    We have read the can, looked on the web, but cannot find how long we need to let the 100 stain dry before we are able to put out metal deck furniture and use the deck. Could you please advise? We are patient, but are looking forward to using our new deck. :D

    1-2 days but depends on weather and UV exposure.
  • We will reply to your comment shortly
    Harry Jones · 07/16/2015
    We have read the can, looked on the web, but cannot find how long we need to let the 100 stain dry before we are able to put out metal deck furniture and use the deck. Could you please advise? We are patient, but are looking forward to using our new deck. :D
  • We will reply to your comment shortly
    TWP Stains · 07/15/2015
    Mark Bready:
    Sir,
    My deck and vertical wood; treated pine, are 8 yrs old and have had a sherwin williams oil transparent that is 5 yrs old. The stain is wearing off and some of the wood is checking. What do you suggest for prepping and which product would be best ? The 100 or the 1500 ?

    Prep first with the Restore A Deck Stain stripper with pressure washing. After removal you will need to apply the RAD brightener. Stain with either the 1500 or 100 series based on what is allowed in your state.
  • We will reply to your comment shortly
    TWP Stains · 07/15/2015
    Roberta Lee:
    We hope to stain in the next few days after brightening (already used cleaner). The forecast calls for highs 94-95 and heat indices of up to 105. The TWP 100 can states to stain between 50-90 degrees and cautions about the set point. Should we wait until the temperature gets under 90 before we stain?

    Sorry did not see this but yes best to be careful if over 90 degrees.
  • We will reply to your comment shortly
    Mark Bready · 07/15/2015
    Sir,
    My deck and vertical wood; treated pine, are 8 yrs old and have had a sherwin williams oil transparent that is 5 yrs old. The stain is wearing off and some of the wood is checking. What do you suggest for prepping and which product would be best ? The 100 or the 1500 ?
  • We will reply to your comment shortly
    Roberta Lee · 07/13/2015
    We hope to stain in the next few days after brightening (already used cleaner). The forecast calls for highs 94-95 and heat indices of up to 105. The TWP 100 can states to stain between 50-90 degrees and cautions about the set point. Should we wait until the temperature gets under 90 before we stain?
  • We will reply to your comment shortly
    TWP Stains · 07/12/2015
    davef:
    I previously used an Olympic deck stain on my deck, and I have prepped the deck for a new staining using the Olympic deck cleaner. Will the TWP 100 product cover/blend with the old stain or does it need to be stripped?

    You cannot apply the TWP over the Olympic so you will need to strip it.
  • We will reply to your comment shortly
    davef · 07/12/2015
    I previously used an Olympic deck stain on my deck, and I have prepped the deck for a new staining using the Olympic deck cleaner. Will the TWP 100 product cover/blend with the old stain or does it need to be stripped?
  • We will reply to your comment shortly
    TWP Stains · 07/05/2015
    scott nagel:
    Age of wood: 18 yrs
    Type: pressure treated
    Condition: good to fair
    Stained: yes Thompsons washed right off
    Entire deck to be reappplied

    Prep with the Gemini Kit and stain with the TWP 100 if allowed in your state or the 1500 if not.