TWP 100 Series Deck Stain - The Best Deck Stain

TWP 100 StainNeed Help or Advice when using TWP 100 Stain?

TWP 100 Series Total Wood Protectant (TWP) Wood Deck Stain protects and prolongs all exterior woods, decks, and fences. TWP Wood Deck Stains and Sealers is a distinctive mixture of chemicals blended together to form a professional strength formula that preserves exterior wood surfaces in numerous ways. 

TWP 100 Series Stain will perform at its maximum potential when the wood is properly prepped and when the stain is properly applied. Unfortunately not all wood is in the same condition prior to applying the stain.

Order Now: TWP 100 Series

Do you have any questions about using the TWP 100 Wood and Deck Stain?

Please answer these few questions to achieve the best possible results with your TWP 100 Wood and Decking Stain.

  1. info buttonAge of wood?
  2. Type of wood?
  3. Condition of the wood?
  4. Has it been stained previously and if so with what brand of stain?
  5. Small description of the area to be treated.

Ask Questions in Comment Area Below

Ask a Question or Post a Picture...
You are guest ( Sign Up ? )
or post as a guest
Loading comment... The comment will be refreshed after 00:00.
  • We will reply to your comment shortly
    Bruce Wilkins · 07/26/2017
    Trying again - dont know why 1st request got truncated. Age
  • We will reply to your comment shortly
    TWP Stains · 07/26/2017
    Ray Breiding:
    TPW 100
    Can I put more than one coat on?
    How long between coats?

    Hello, depends on if the wood is new or older wood if you can do two coats. New wood is one coat. Older wood is typically two coats applied wet on wet. See this about wet on wet:
    https://www.twpstainhelp.com/twp-stain-wet-on-wet-application/
  • We will reply to your comment shortly
    Ray Breiding · 07/26/2017
    TPW 100
    Can I put more than one coat on?
    How long between coats?
  • We will reply to your comment shortly
    TWP Stains · 07/26/2017
    Bruce Wilkins:
    Direct from sawmill, est'd

    Not sure what your question is?
  • We will reply to your comment shortly
    Bruce Wilkins · 07/25/2017
    Direct from sawmill, est'd
  • We will reply to your comment shortly
    TWP Stains · 07/24/2017
    Gary Hallett:
    Pressure washed Ipe wood what kind of natural product should I put on it.thanks Gary

    Most use the 116 Rustic color.
  • We will reply to your comment shortly
    Gary Hallett · 07/24/2017
    Pressure washed Ipe wood what kind of natural product should I put on it.thanks Gary
  • We will reply to your comment shortly
    TWP Stains · 07/24/2017
    Rachel Karlin:
    15 year old Rainbow play system. Most is either redwood or Douglas fir. We have replaced some board with cedar and pressure treated. It was stained previously with Rainbow's own stain. Most of that has either worn or been power washed away. Wondering what the best solution is given the different types of wood we have. And will a semi-transparent stain unite the wood enough in appearance? Will the new cedar pieces eventually match the old wood, or will staining prevent the aging of the new pieces?

    It will not be possible to match the new and old wood exactly based on the age and different types of wood. Best would be a reddish tint in the 1500 Series. Look at the TWP 1516 Rustic.
  • We will reply to your comment shortly
    Rachel Karlin · 07/24/2017
    15 year old Rainbow play system. Most is either redwood or Douglas fir. We have replaced some board with cedar and pressure treated. It was stained previously with Rainbow's own stain. Most of that has either worn or been power washed away. Wondering what the best solution is given the different types of wood we have. And will a semi-transparent stain unite the wood enough in appearance? Will the new cedar pieces eventually match the old wood, or will staining prevent the aging of the new pieces?
  • We will reply to your comment shortly
    TWP Stains · 07/07/2017
    Sam Malone:
    Hi, I have a 17 year old redwood deck in Denver, Colorado. Superdeck has been used on this deck since it was built. The deck is being stripped to original wood with Deck Restore. I may sand as well as i have some fuzzies showing. I would say the condition of the wood is average for a deck of this age. Which product would you recommend? We have used redwood color in the past but was unsure if there is any reason to use a different color in regard to showing dirt, wear?

    Use the 100 Series. Any color that you like will work. TWP does not darken like the Super Deck so dirt does not matter.
  • We will reply to your comment shortly
    Sam Malone · 07/06/2017
    Hi, I have a 17 year old redwood deck in Denver, Colorado. Superdeck has been used on this deck since it was built. The deck is being stripped to original wood with Deck Restore. I may sand as well as i have some fuzzies showing. I would say the condition of the wood is average for a deck of this age. Which product would you recommend? We have used redwood color in the past but was unsure if there is any reason to use a different color in regard to showing dirt, wear?
  • We will reply to your comment shortly
    TWP Stains · 07/05/2017
    Diane Deck:
    Hi. I have a 2 year old pressure treated deck with no treatment on it I live in NY and deck has full sun and we have 3 large dogs besides looking to keep the deck in a more natural color and do u have a 1 coat product ?

    TWP is applied 2 coats wet on wet. Prep the deck with the Gemini Restore Kit and stain with the TWP 1500 Series for NY.
  • We will reply to your comment shortly
    Diane Deck · 07/04/2017
    Hi. I have a 2 year old pressure treated deck with no treatment on it I live in NY and deck has full sun and we have 3 large dogs besides looking to keep the deck in a more natural color and do u have a 1 coat product ?
  • We will reply to your comment shortly
    TWP Stains · 07/04/2017
    Bob Page:
    1. new wood 2. douglas fir 3. new 4. not previously stained, 5. picnic table in western NC mountains I am thinking TWP 100 ?

    Yes but see this about new wood:
    https://www.twpstainhelp.com/prepping-new-wood-for-twp-stains/
  • We will reply to your comment shortly
    Bob Page · 07/03/2017
    1. new wood 2. douglas fir 3. new 4. not previously stained, 5. picnic table in western NC mountains I am thinking TWP 100 ?
  • We will reply to your comment shortly
    TWP Stains · 07/02/2017
    Bob Hill:
    Pine, AZ. 6,000 foot elevation. Neglected for ten years. Moldy, very dried out in places. 1200 sq ft wrap around redwood deck. Mostly exposed, 1/3 under covered porch still showing some stain. Clean and brighten with restore a deck, strip old stain and brighten. Sand it all then 1500 or 100 series stain?

    Use the 1500 Series for this.
  • We will reply to your comment shortly
    Bob Hill · 07/01/2017
    Pine, AZ. 6,000 foot elevation. Neglected for ten years. Moldy, very dried out in places. 1200 sq ft wrap around redwood deck. Mostly exposed, 1/3 under covered porch still showing some stain. Clean and brighten with restore a deck, strip old stain and brighten. Sand it all then 1500 or 100 series stain?
  • We will reply to your comment shortly
    TWP Stains · 06/30/2017
    Julia Smith:
    I am new to this and just applied TWP 1500 to my deck only to discover I have the fuzzies on my railing. Can I sand the railing then reapply TWP? Wood is pressure treated lumber, 10 years old, never treated-- pretty bad condition. Thanks!

    Yes, you can do this.
  • We will reply to your comment shortly
    Julia Smith · 06/30/2017
    I am new to this and just applied TWP 1500 to my deck only to discover I have the fuzzies on my railing. Can I sand the railing then reapply TWP? Wood is pressure treated lumber, 10 years old, never treated-- pretty bad condition. Thanks!
  • We will reply to your comment shortly
    TWP Stains · 06/27/2017
    Popesterm:
    Installed cedar vertical fencing 9 months ago in Oklahoma. Used TWP 100 Clear when installed. The cedar has western exposure and the natural yellow/red color is starting to fade. Would like to restore natural yellow/red color and eliminate potential of graying. What stain should I apply?

    For UV protection, you will need to use a tinted color. Try the Honeytone 115. Prep with the Restore A Deck Stripper Kit.