Wood Stain Samples

randy vavrina:

I have a 5 year old home with cedar siding with chinking between the planks which gives it a log home look. It was stained with Cabot semi transparent stain (oil) in their chestnut brown. The home is in Colorado at 7500' elevation. The UV is really strong here. The climate is relativley dry, we get very strong winter winds and the temperature can get as low as -20 and as high ass 90. The east and west side of the home is looking very thirsty and the siding is starting to turn a little dark. Will the TWP 1500 work and can you match the tint to the cabot color if we got the color formula? How long would you say the TWP would last in these conditions?

We do not color match and you would need to prep first by using the Restore A Deck Stripper and pressure washing to remove the Cabot. Apply brightener when finished. One verticals it will last 5-8 years, maybe longer.

Ken F.:

Hi, we live in southern Indiana. We have a redwood deck that is 35 years old , and we are sanding with 40 grit sandpaper to remove all the old finish . I'm 65 years old and wife is 62 so we are not very fast we're in to our second week of sanding and may need another week to finish . The first wood we sanded has been rained on and is starting to lose it's red pinkish tint . What do we need to do after we finish sanded before we apply your 1500 product? We are thinking maybe the 1511 Cal. Red . Like I said we're kind of slow and don't know if we can get the second coat on before the first drys , should we try for two coats or put on one and then reapply next year? We do not want this peeling off like the last product we put on it which was Behr weather proofing wood finish. We are hoping to never have to sand again. Any and all suggestions are greatly appreciated . Thanks ,Ken

Use the Gemini Restore Kit after the sanding for the final prep. Get some samples from site for colors.

If you cannot do the wet on wet application then just do one coat now and one coat next year only if needed. Best to have full penetration.

Hi, we live in southern Indiana. We have a redwood deck that is 35 years old , and we are sanding with 40 grit sandpaper to remove all the old finish . I'm 65 years old and wife is 62 so we are not very fast we're in to our second week of sanding and may need another week to finish . The first wood we sanded has been rained on and is starting to lose it's red pinkish tint . What do we need to do after we finish sanded before we apply your 1500 product? We are thinking maybe the 1511 Cal. Red . Like I said we're kind of slow and don't know if we can get the second coat on before the first drys , should we try for two coats or put on one and then reapply next year? We do not want this peeling off like the last product we put on it which was Behr weather proofing wood finish. We are hoping to never have to sand again. Any and all suggestions are greatly appreciated . Thanks ,Ken

I have a 5 year old home with cedar siding with chinking between the planks which gives it a log home look. It was stained with Cabot semi transparent stain (oil) in their chestnut brown. The home is in Colorado at 7500' elevation. The UV is really strong here. The climate is relativley dry, we get very strong winter winds and the temperature can get as low as -20 and as high ass 90. The east and west side of the home is looking very thirsty and the siding is starting to turn a little dark. Will the TWP 1500 work and can you match the tint to the cabot color if we got the color formula? How long would you say the TWP would last in these conditions?

Farm Built Furniture:

I build outdoor furniture, Swings, Picnic Tables, Chairs by order. Customers are always asking me what to use on there furniture they just bought. I use to recomend Cabot oil stain, but Lowes does not sell it anymore. I want to give them the best product available. Does your product work well on sitting type furniture. Can you help me? Thanks Norman

Yes you can use TWP on exterior wood furniture as long as the wood is prepped correctly.

cory jones:

I bought camp in Western PA with rough cut wood siding. It has been stained at some point with an oilbased stain or linseed oil and needs refreshed. Can I put the TWP1500 over this? Looking at the Black walnut or Dark Oak. I was planning to powerwash and apply. Any suggestions?

You need to remove the old stain first if you want the TWP to perform properly.

I build outdoor furniture, Swings, Picnic Tables, Chairs by order. Customers are always asking me what to use on there furniture they just bought. I use to recomend Cabot oil stain, but Lowes does not sell it anymore. I want to give them the best product available. Does your product work well on sitting type furniture. Can you help me? Thanks Norman

I bought camp in Western PA with rough cut wood siding. It has been stained at some point with an oilbased stain or linseed oil and needs refreshed. Can I put the TWP1500 over this? Looking at the Black walnut or Dark Oak. I was planning to powerwash and apply. Any suggestions?

pat hertzel:

need samples

Add sample colors to cart above.

need samples

samples

Leslie Lake:

Hello, How long will it take to ship samples to Columbus, Ohio

About 1-2 business days.

Sonicstng:

I have Western Red Cedar deck and want to know which stain color in the 1500 series will allow the cedar to retain it's natural appearance/color?

Thanks..

All TWP colors will enhance the natural grain of the wood. Not sure what color you want to enhance too so that is why you should test a few samples.

I have Western Red Cedar deck and want to know which stain color in the 1500 series will allow the cedar to retain it's natural appearance/color?

Thanks..

Merrilee Curry:

I'm refinishing an older redwood deck and would like a semi transparent stain. It appears that your 100 series is not legal in California. I would like to try a sample of the 1500, is that possible?

Yes just order above.

I'm refinishing an older redwood deck and would like a semi transparent stain. It appears that your 100 series is not legal in California. I would like to try a sample of the 1500, is that possible?

Jerald Smith:

I am building a square log house in the southern Black Hills of South Dakota, the outside of the logs will be left as they came from the sawmill, the inside will be planed smooth. I would like to stain the outside a darker, kind of like a dark mahogany for UV protection and the inside a more natural color. The logs are pondarosa pine. What color do you recomend and which stain, 1500, or the 100?

Use the 1500 Series and would strongly suggest you get some samples to test. Maybe Rustic, Dark Oak, Natural, Honeytone.

Frances Cogelja:

I currently have woman red cedar color durastain semi transparent on my deck. It is about 4 years old. Which of the TWP 1500 series colors would cover the color I currently have?

TWP cannot be applied on top of Wolman. You would need to remove the Wolman first and that would take sanding and or stripping.

I am building a square log house in the southern Black Hills of South Dakota, the outside of the logs will be left as they came from the sawmill, the inside will be planed smooth. I would like to stain the outside a darker, kind of like a dark mahogany for UV protection and the inside a more natural color. The logs are pondarosa pine. What color do you recomend and which stain, 1500, or the 100?

I currently have woman red cedar color durastain semi transparent on my deck. It is about 4 years old. Which of the TWP 1500 series colors would cover the color I currently have?