Best TWP Stain for Shakes and Shingles

by TWP Stains

Wood shakes and shingles are commonly found on older architectural type homes but are still a popular choice on newer homes as well. Shake siding and wood shingles can give a home a charming look that can last for many years. Although these wood surfaces can be very appealing, they are prone to water and sun damage when they are left unprotected. Protecting these surfaces with a quality wood stain can prolong the life of the wood and enhance its natural beauty. This not only increases your home’s curb appeal, but protects against wood rot and decay caused by years of weather exposure.

The best TWP Stain for shakes and shingles is the 200 Series Wood Stain. TWP 200 Series Stain is a deep penetrating oil stain that contains more than 94% solids extending the life of exterior wood surfaces like wood shakes and wood shingles. The non-drying paraffin oil enhances the wood cells structural stability to greatly improve the wood’s appearance and longevity.

TWP 200 Series Wood Stain repels and sheds harmful water and moisture, which can otherwise penetrate and damage shakes and shingles. These surfaces are also prone to sun damage, especially shakes and shingles on a horizontal surface like a roof. TWP 200 Series prolongs UV fading and discoloring caused by overexposure to harmful UV rays.

The 200 series product is compliant in all 50 states and is available in many different colors to meet your wood staining needs. Protect your home’s exterior shakes and shingles with the dependability of TWP’s 200 Series Wood Preservative. To purchase the best stain for shakes and shingles buy from an official TWP online dealer. Experience the quality and dependability of TWP 200 Series Wood Stains and extend the life and beauty of your wood shakes and shingles.

Please Ask any Questions in the Comment Area!

 

Subscribe
Notify of
guest
83 Comments
Inline Feedbacks
View all comments
Pam
Pam
9 months ago

can this go on older cedar shingles that are weather worn?

Pam
Pam
9 months ago
Reply to 

No stain on them. They are quite old and weathered and we are right on the salty beach (Pacific Ocean). They are also sun baked but I don’t really want to re-shingle

ray hulick
ray hulick
11 months ago

How can I find the TWP 200 series in Honolulu Hawaii

Shawn
Shawn
1 year ago

Can I use 200 series on a deck, seems like it would last longer..

Bruce Crombie
Bruce Crombie
1 year ago

Are u in Canada or only USA

Carol
Carol
1 year ago

Understood. In general, would you say that stain can be removed from the cedar shake? 

Carol
Carol
1 year ago

We are purchasing a home that has a sage green stain on the exterior cedar shake.
Can we restain the shake to a lighter color such as gray?

DJ Ahearn
DJ Ahearn
1 year ago

I am (wall) shingling a house. Red Cedar is impossible to get at the moment.
is there a stain that will mimic the red cedar look on white cedar shingles?

Steve
Steve
2 years ago

I just had red cedar shingles put on the facade of my house.  Does the 4 to 12 month waiting time apply to the shingles or just decking material?

steve
steve
2 years ago
Reply to 

They are smooth.

PL
PL
2 years ago

What temperature should I stain my shake roof? I live in Maryland and at times it’s below 30 degrees during these winter months.

Diane
Diane
2 years ago

We just installed primed red cedar shakes on our home that have a gray tone to them. I like the way they look now. What do we do to preserve them and keep them looking as natural as they do now? From what I read, the TWP 200 Series Wood Stains (semi-transparent?) are the best choice as long as I pick a color closest to the gray tone we have now, am I correct?

N MEYJES
N MEYJES
3 years ago

CAN THE STAIN BE DILUTED? IF SO WITH WHAT – I AM TRYING TO MATCH A FADED AREA

Linda
Linda
3 years ago

Does the solid stain come in color

Karen
Karen
3 years ago

What is the best TWP product for a cedar shingle house. Restraining it. 

compare TWP stains
3 years ago

I live in North Georgia and have cedar shingle siding now 6 years old and originally stained with a semi transparent finish. Which product would you recommend for longevity, TWP 100, 200, or 1500.

Louis S
Louis S
3 years ago

Pacific NW home here and would like to try and get the shake back to the original color. Recommendations for doing that and keeping it maintained? The shake is 5 years old.

Louis S
Louis S
3 years ago
Reply to 

Which color in the 200 series is most similar to the 115 Honeytone? The previous owner left unused 115 Honeytone and I can’t tell if they used it for the shakes or just the deck.

Kathy
Kathy
3 years ago

I have shakes on my home that are painted. I would like to stain or paint them a brown to make them look like wood. Do you have a product for that?

MC
MC
3 years ago

What do you suggest to clean and to stain these? Will the original color come back or are these too weathered? Ideally I’d like an even color.

A.Mingus
A.Mingus
4 years ago

We have a new pressure treated pine deck and new red cedar shake up the gable walls. Says 200 series was best for the shake can I use this for both or go 1500 . Want best protection we live in northern Ohio. Thanks

compare TWP stains
5 years ago

I live just north of Seattle and Have a significant amount of cedar shake siding on the north side. I believe the shake was pre-stained before installation but I don’t know if it was oil or water based. I have used cleaner, brushed and (low pressure) pressure washed the shingles and I want to use the longest lasting stain I can as this is a bear of a job (the siding is on the second and third floors). I understand your 200 series is recommended for siding. I also understand oil based stains cannot be used over water based stains. How would I know if Your 200 series stain will work for on these pre-stained shingles?

compare TWP stains
5 years ago
Reply to 

Thank you. Do I apply 1 coat? A 2nd coat soon after the first? Or 2nd coat next summer? The siding has been on for 10 years. And what is the process to re-coat it in the future? Can I clean and re-apply the 200 series? Or, will it need to be stripped and re-applied?

Lisa Sotherlund
Lisa Sotherlund
5 years ago

I have cedar shingle siding. I have stained them using Olympic stain in the past. I have found that the stain bleeds as the shingles get wet and over time there are drip marks at the bottom of the shingles and even discolors my white woodwork. Does TWP bleed?

Darren
Darren
6 years ago

Does the 200 series have mildewcide? What’s best to use on cedar shakes to also prevent mold and mildew?

Diane
Diane
6 years ago

What is best to use on 10 year old cedar shakes that were installed and stained/sealed at that time?

Matt Hubbard
Matt Hubbard
6 years ago

What is the best way to apply your product to a cedar shake roof? Can it be sprayed with a pump sprayer or should it be rolled with a thick nap roller? Or a combination of both?

Edwin Stewart
Edwin Stewart
7 years ago

can you use 200 series on cedar deck?

Edwin Stewart
Edwin Stewart
7 years ago

Can I use 200 Series, acutally 207 Butternut on cedar deck?

Brooks Miller
Brooks Miller
7 years ago

I have new cedar shingles on the walls and new redwood deck. Should I use the 200 on shingles and the redwood deck? Or should I use the 1500 on the redwood deck?

William T. Muzzall
William T. Muzzall
7 years ago

I am having new red cedar shingles installed on the front of our 10 year old home. Should I use your TWP 200 Series and is it available in different colors? Do the shingles need to be pre-treated in any way, it is an East facing front near Seattle ,WA.

rausda27
rausda27
7 years ago

We have a home with a cedar shingle roof. In doing some research, I have read that you should never apply a sealant to the cedar roofs because the cedar is designed to absorb water and thats why it is an effective roofing material. Is this product different in that sense? I don’t want to apply something to the cedar that will shorten its lifespan or degrade its performance. I am also wondering what kind of cleaning is required before application?

LinZoid
LinZoid
8 years ago

We just purchased an older (40’s) house that has a cedar shake roof, cedar shingle siding, and an ipe deck that is probably 8-10 years old. The roof and siding was just pressure washed. I need to know what products to use on the roof, siding, and decking. I do know that the previous owner used TWP Honeytone for the siding, but that is all I have to go on. After hours online, I am still confused on what to do on the roof. Any help would be greatly appreciated.

Thanks!!

Wade C
Wade C
8 years ago

I am interested in TWP for the staining of the exterior of my 1929 home that has cedar shingles stained with a solid dark brown stain (now faded after many years. Does the TWP product come in a solid color dark brown? This is in Maine. Thanks

Andys Toolbox
Andys Toolbox
8 years ago

Which TWP product is best for horizontal plank cedar siding ?

Jeffrey Hazlett
Jeffrey Hazlett
8 years ago

I have a cedar clap board sided home and need to almost start over with cleaning and staining. I have before and what it looks like now pictures. Is there a way that I could send them to you so that I could get a plan of attack on my house?

Lynda C
Lynda C
9 years ago

Our home was originally stained with a Sikkens product many many years ago. About seven years ago it was stained again; however, a Pittsburgh Paints stain, Sunproof semi-transparent in teak was used. It turned out darker than expected and has gotten even darker with time. We would like it to be lighter and are planning on stripping the vertical siding and would like to use a clear stain? However, for the shakes and shingles, I read that we should use your 200 series. So, would I 200 on the shingles and 100 on the vertical siding? And, how about stripping the shingles, is that okay, if so, any special recommendations on the best way to do it? Thanks so much for your help.

J.P Stevenson
J.P Stevenson
9 years ago

A contractor just finished resealing my boat dock. It is a very old,weathered dock. He left empty cans that list the product as TWP shingle and shaker sealant. Will this last on a boat dock?

Lucia Sander
Lucia Sander
9 years ago

If we are using TWP 1500 on our log home but have shakes on the gable, can I use the same TWP 1500 on the shakes?

joe deck
joe deck
9 years ago

would twp 200 be a good choice for a 4 year old cedar deck in austin txas? I’ve been using twp 1500 but in high traffic areas and parts where full sun beats on the deck, the finish wears by end of 1st season.

John Mesick
John Mesick
9 years ago

We are reconstructing an artist’s studio building, originally constructed in 1846, and the roofing will be Alaskan Yellow Cedar shingles. It was described as being orange in color. Can you produce the 200 Series stain in orange. It does not need to be a brilliant hue?

Nearly a decade ago you produced a custom color for us to use in the restoration of James Madison’s Montpelier in Virginia.

83
0
Would love your thoughts, please comment.x