TWP 200 Series 5 Gallon

$189.95
free shipping with ground services
Stain Color
 Back to: TWP Wood Stains

TWP 200 Series is now available to be shipped to Canada!

The TWP 200 Series was designed for shakes and shingles but can be used for all exterior wood surfaces such as decking, fencing, log homes, cedar framed homes, etc.

TWP 200 Series is a semi-transparent oil based penetrating finish designed to extend the life of exterior wood such as decking, cedar shake siding, and shingles. Containing a paraffin oil, TWP 200 series penetrates wood extremely well. The Paraffin oil is a "non-drying" oil that enhances the wood cells structural stability. This greatly improves the woods life and appearance.

TWP 200 Series primary function is to enhance the structural integrity and appearance of aged roofing. The finish composition will minimize grain cracking, cupping, surface erosion, water absorption and surface attack from mildew and algae.  Although the system is highly penetrative, the residual surface film is highly resistant to destructive organisms.  The penetrative portion of the product absorbs into aged and porous wood, adding bulk to aged and brittle wood fiber.  This restores lubricity and flexibility to brittle shingles.  At 94%+ solids, these products comply with all current federal and state VOC (volatile organic compounds) regulations.

TWP 200 SERIES will not crack, peel or blister making maintenance an easy task to perform for extended wood protection.

  • Compliant in all States
  • Sheds and Repels Water
  • Prolongs UV Fading
  • 8 Colors. Can take up to 30 days to cure to final color.

Material Preparation:
Due to different substrates, wood density, sanding, wiping and application methods, and atmospheric conditions, ALWAYS check actual stain color for accuracy before finish work process begins. We are not responsible for color variances following application of the product.

**TWP® 200 Clear allows wood to gray naturally

TWP 200 Series colors

Gallon Sizes: 5 Gallons
Coverage Per Gallon: 150-250 square feet
Coats  Required: 1 Coat
Temperature: 45-95 F
Application Tools: Pad, Sprayer, Brush, Roller
Dry Time: 48-96 Hours.
Cleanup: Mineral Spirits
State VOC Limits: Compliant in all States
More Info: Product Data

Reviews

Thursday, 19 October 2017

Best coating on the market for shake and shingle cedar roofs.

TWP Stains
Ask a Question or Post a Picture...
You are guest ( Sign Up ? )
or post as a guest
Loading comment... The comment will be refreshed after 00:00.
  • We will reply to your comment shortly
    richard bennett · 05/04/2015
    I just purchased 5 gallons of your 210 slate grey. the grey is very hard and solid like on the bottom of the can.is not stirring up very well. any ideas?
  • We will reply to your comment shortly
    TWP Stains · 04/06/2015
    richard bennett:
    I purchased 1 gallon of TWP slate Gray 210 several years ago . I now need to replace some deck boards and re- stain.
    Do you still sell in a single gallon container?

    Sorry but we only have it in 5 gallon pails.
  • We will reply to your comment shortly
    richard bennett · 04/06/2015
    I purchased 1 gallon of TWP slate Gray 210 several years ago . I now need to replace some deck boards and re- stain.
    Do you still sell in a single gallon container?
  • We will reply to your comment shortly
    TWP Stains · 03/28/2015
    C Shinn:
    Ive done some research and have decided on trying your product. I have rough cut red cedar I milled 3 years ago that has been stored in a shed. It will be installed vertically. I am wondering about the clear finish. If I use it will it naturally turn gray even it I kept up on maintenance and recoated as per your specs? DO you recommend coating the back side also? It will be installed with horizontal nailers about every 2 feet. The cedar is a full 1 inch thick and random widths of 6 to 8 inches wide. Also, there is some with dark red to purple in color due to not being in the sun. I assume that will fade out in a short ammount of time? Kinda kicking around the idea of the Gray color also. Do you have or know of where I could see some colors on some actual houses? Thanks for your time, as I am sure Ill have a couple more Questions.
    Regards,
    C. Shinn

    Clear will gray naturally in months. Tinted will last years. Not need to coat the backside. Not sure about the fading of the red/purple as that really depends on the wood.
  • We will reply to your comment shortly
    C Shinn · 03/27/2015
    Ive done some research and have decided on trying your product. I have rough cut red cedar I milled 3 years ago that has been stored in a shed. It will be installed vertically. I am wondering about the clear finish. If I use it will it naturally turn gray even it I kept up on maintenance and recoated as per your specs? DO you recommend coating the back side also? It will be installed with horizontal nailers about every 2 feet. The cedar is a full 1 inch thick and random widths of 6 to 8 inches wide. Also, there is some with dark red to purple in color due to not being in the sun. I assume that will fade out in a short ammount of time? Kinda kicking around the idea of the Gray color also. Do you have or know of where I could see some colors on some actual houses? Thanks for your time, as I am sure Ill have a couple more Questions.
    Regards,
    C. Shinn
  • We will reply to your comment shortly
    TWP Stains · 03/02/2015
    Evan:
    I have a 35 year old cedar shiplap (tongue and grove) siding... fairly worn stuff. My painter is reccommending the 200 series over the 1500 series. The 200 series will work on Shiplap, right? The product says that it is for shake and shingle but I assume it will work on any type of cedar well. Thanks.

    Yes it will work on this.
  • We will reply to your comment shortly
    Evan · 03/01/2015
    I have a 35 year old cedar shiplap (tongue and grove) siding... fairly worn stuff. My painter is reccommending the 200 series over the 1500 series. The 200 series will work on Shiplap, right? The product says that it is for shake and shingle but I assume it will work on any type of cedar well. Thanks.
  • We will reply to your comment shortly
    TWP Stains · 01/21/2015
    Peter Brzezicki:
    I have a hem/fir log cabin like novelty siding. It has been stained with Olympic Cedartone 4 years ago and is starting to fade. What TWP stain would be appropriate to stain over this? What cedar tone like stain is the lightest color?

    You should not apply TWP over top of an older and different stain. Best to prep first to remove the old stain and brighten the wood when done. You can use the 200 Series or the 1500 Series for this.
  • We will reply to your comment shortly
    Peter Brzezicki · 01/21/2015
    I have a hem/fir log cabin like novelty siding. It has been stained with Olympic Cedartone 4 years ago and is starting to fade. What TWP stain would be appropriate to stain over this? What cedar tone like stain is the lightest color?
  • We will reply to your comment shortly
    TWP Stains · 10/24/2014
    RK:
    Hello - I am in Michigan and had a cedar fence installed in June - a few areas have begun to gray slightly, but for the most part I like the more natural color shade and do not want to hide the rough wood grains - which stain would be best to give me a slight tint without having a painted or solid-stain appearance?

    Right now I'm leaning towards TWP200 or 203 - will that be my best bet to add a little bit of color without masking the natural look of the fence?

    Thank you for your help!

    Ryan

    200 Series is for cedar shake siding and roofs. You would want the 100 Series. None of the TWP products will give a solid or painted look. The lightest tint/color in the 100 series is the 115 Honeytone.
  • We will reply to your comment shortly
    RK · 10/23/2014
    Hello - I am in Michigan and had a cedar fence installed in June - a few areas have begun to gray slightly, but for the most part I like the more natural color shade and do not want to hide the rough wood grains - which stain would be best to give me a slight tint without having a painted or solid-stain appearance?

    Right now I'm leaning towards TWP200 or 203 - will that be my best bet to add a little bit of color without masking the natural look of the fence?

    Thank you for your help!

    Ryan
  • We will reply to your comment shortly
    TWP Stains · 10/02/2014
    Will84:
    Hello, please help. I recently received 2 estimates for a deck stain. The first guy said he would use 2 coats of TWP 100. The next person said that he would use a single coat of TWP 201. When I asked about the difference, he told me that the 201 was just a commercial grade product. I went with the second guy and today my deck was stained with 201. After reading the PDS for 200, I see that the product is intended for shakes / shingles. I am especially concerned about the statement that "the system is designed for non-traffic surfaces"

    Do I have anything to be concerned about since the 201 was applied to a surface that it wasn't intended? Do you have any info on using this product on decks?

    Thank you for any information.

    You will be fine but it may take a while to fully cure and dry.
  • We will reply to your comment shortly
    Will84 · 10/01/2014
    Hello, please help. I recently received 2 estimates for a deck stain. The first guy said he would use 2 coats of TWP 100. The next person said that he would use a single coat of TWP 201. When I asked about the difference, he told me that the 201 was just a commercial grade product. I went with the second guy and today my deck was stained with 201. After reading the PDS for 200, I see that the product is intended for shakes / shingles. I am especially concerned about the statement that "the system is designed for non-traffic surfaces"

    Do I have anything to be concerned about since the 201 was applied to a surface that it wasn't intended? Do you have any info on using this product on decks?

    Thank you for any information.
  • We will reply to your comment shortly
    TWP Stains · 09/01/2014
    Fred Icard:
    I have previously purchased TWP 206 Russet Brown stain for my cedar deck pergola, railings, and support beams. This color is not currently shown on your weg site. Has it heen discontinued? If so, what TWP product would be a good substitute?

    Looks at the 1516 Rustic as we do not carry the 206 Russet Brown.
  • We will reply to your comment shortly
    Fred Icard · 09/01/2014
    I have previously purchased TWP 206 Russet Brown stain for my cedar deck pergola, railings, and support beams. This color is not currently shown on your weg site. Has it heen discontinued? If so, what TWP product would be a good substitute?
  • We will reply to your comment shortly
    TWP Stains · 08/27/2014
    TOM BATES:
    [b]I have 4 gal. of 200 Clear left over from covering my cedar shingled roof. I would like to use it on the ceiling of my screened-in porch in order to cover hand and finger prints. Is this an appropriate use? Also, the clear product is too light and a test area shows that hand prints still show. Could I purchase pigment to darken my supply?[/b]

    No you cannot add tint to darken the clear. Might want to clean off the prints then use the clear as is.
  • We will reply to your comment shortly
    TOM BATES · 08/26/2014
    [b]I have 4 gal. of 200 Clear left over from covering my cedar shingled roof. I would like to use it on the ceiling of my screened-in porch in order to cover hand and finger prints. Is this an appropriate use? Also, the clear product is too light and a test area shows that hand prints still show. Could I purchase pigment to darken my supply?[/b]
  • We will reply to your comment shortly
    TWP Stains · 06/25/2014
    George Miles:
    I stained my cedar shingle home and deck with TWP501C natural cedar. What other TWP stains will match this stain color in the 100, 200, and 1530 series? Also is it true that a darker stain holds up better in longevity? What would be a little darker but similar to the TWP501C natural cedar stain in all series? Is Twp501C discontinued? Thank you

    The 1501 Cedartone is the same color as the 501 Cedartone that is not longer available.
  • We will reply to your comment shortly
    George Miles · 06/25/2014
    I stained my cedar shingle home and deck with TWP501C natural cedar. What other TWP stains will match this stain color in the 100, 200, and 1530 series? Also is it true that a darker stain holds up better in longevity? What would be a little darker but similar to the TWP501C natural cedar stain in all series? Is Twp501C discontinued? Thank you
  • We will reply to your comment shortly
    Drew J. · 05/31/2014
    I had my fence and deck stained with TWP207 butternut brown. I need one gallon for staining a play set. What product and color should I use for a playset to,get as close to butternut brown as possible?