TWP 200 Series 5 Gallon

3 Ratings 3 Reviews
free shipping with ground services

Stain Color
 Back to: TWP Wood Stains

TWP 200 Series is now available to be shipped to Canada!

The TWP 200 Series was designed for shakes and shingles but can be used for all exterior wood surfaces such as decking, fencing, log homes, cedar framed homes, etc.

TWP 200 Series is a semi-transparent oil based penetrating finish designed to extend the life of exterior wood such as decking, cedar shake siding, and shingles. Containing a paraffin oil, TWP 200 series penetrates wood extremely well. The Paraffin oil is a "non-drying" oil that enhances the wood cells structural stability. This greatly improves the woods life and appearance.

TWP 200 Series primary function is to enhance the structural integrity and appearance of aged roofing. The finish composition will minimize grain cracking, cupping, surface erosion, water absorption and surface attack from mildew and algae.  Although the system is highly penetrative, the residual surface film is highly resistant to destructive organisms.  The penetrative portion of the product absorbs into aged and porous wood, adding bulk to aged and brittle wood fiber.  This restores lubricity and flexibility to brittle shingles.  At 94%+ solids, these products comply with all current federal and state VOC (volatile organic compounds) regulations.

TWP 200 SERIES will not crack, peel or blister making maintenance an easy task to perform for extended wood protection.

  • Compliant in all States
  • Sheds and Repels Water
  • Prolongs UV Fading
  • 8 Colors. Can take up to 30 days to cure to final color.

Material Preparation:
Due to different substrates, wood density, sanding, wiping and application methods, and atmospheric conditions, ALWAYS check actual stain color for accuracy before finish work process begins. We are not responsible for color variances following application of the product.

**TWP® 200 Clear allows wood to gray naturally

TWP 200 Series colors

Gallon Sizes: 5 Gallons
Coverage Per Gallon: 150-250 square feet
Coats  Required: 1 Coat
Temperature: 45-95 F
Application Tools: Pad, Sprayer, Brush, Roller
Dry Time: 48-96 Hours.
Cleanup: Mineral Spirits
State VOC Limits: Compliant in all States
More Info: Product Data


Saturday, 06 August 2022

The surface Prep Instructions of new Cedar Shakes calls for water wetting of the shakes 2 times, waiting at least 48 hours after each wetting step. This is to open wood grain and remove tannins from surface. Won't the wood grain close back up after the drying period is over? TWP200 is the product. thanks

Alan Rider

Monday, 15 March 2021

Worked great!


Thursday, 19 October 2017

Best coating on the market for shake and shingle cedar roofs.

TWP Stains
More reviews

Please log in to write a review. Log in

Ask a Question or Post a Picture...
You are guest ( Sign Up ? )
or post as a guest
Loading comment... The comment will be refreshed after 00:00.
  • We will reply to your comment shortly
    Steven C. Spirito · 07/10/2013
    Would this product be better for a 40 year old pine log cabin than the 1500?

    what does the 94% solids mean?

    All four of the colors appear the same on the color chart.
  • We will reply to your comment shortly
    TWP Stains · 05/06/2013
    Nicole, prep with the Gemini Restore Kit then stain with the TWP 1500.
  • We will reply to your comment shortly
    nicole · 05/05/2013
    Hi, We have a 5 yr old deck. Pressure treated pine, never stained. What do you suggest?
  • We will reply to your comment shortly
    TWP Stains · 05/04/2013
    Sorry but we do not sell samples of the TWP 200.
  • We will reply to your comment shortly
    Romeo Poitras · 05/04/2013
    Can I get samples for the TWP 200 series?
  • We will reply to your comment shortly
    TWP Stains · 04/23/2013
    You could use either 100 or 1500. The 100 is used more so in GA. The 200 is for shakes and shingles.
  • We will reply to your comment shortly
    Deb · 04/22/2013
    Why would TWP 100 and not TWP 1500? Any reason to avoid TWP 200 (contractors want to use the 200 series)? Do both come in a Redwood color?
  • We will reply to your comment shortly
    TWP Stains · 04/19/2013
    TWP 100 Series would be best for this. Make sure the wood id prepped properly by removing any previous coatings.
  • We will reply to your comment shortly
    Deb · 04/18/2013
    I need to have my pine wood deck resealed (needed to for a few years). It is going to be stripped and sanded. I live in Atlanta and the deck gets decent sun exposure. The previous semi-transparent stain appeared to be a redwood color. What is the appropriate TWP stain that should be used - TWP 200? I think that the prior stain must have been water-based because I never had an algae or mold issue. Is this going to be a problem w/oil-based stain? Is there anything in the re-sealing prep that I should make sure the deck company does to prevent/reduce mold & algae growth?
  • We will reply to your comment shortly
    TWP Stains · 04/16/2013
    No we do not.
  • We will reply to your comment shortly
    william bonavita · 04/15/2013
    Do you have a gray house stain for voc compliant state?
  • We will reply to your comment shortly
    TWP Stains · 11/19/2012
    It would be better to use the 1500 or 100 series since they actually cure/dry.
  • We will reply to your comment shortly
    Alan Mather · 11/18/2012
    I have a deck finished with the #207 butternut and would like to finish a porch swing in the same color. My concern is possible staining clothes as the info mentions it is made with \"non drying\" oils. Is this product suitable for a porch swing or should I use something else?
  • We will reply to your comment shortly
    TWP Stains · 08/17/2012
    I would use 1 part bleach to 5 parts water. Apply to deck and rinse after 5-10 minutes. If it is mold it will go away. If it does not then it could be rust specks. These look like black dots as well. You would need a wood brightener to fix this.
  • We will reply to your comment shortly
    Rick Groveman · 08/17/2012
    So, what procedure would you suggest? Spray watered down solution of bleach, then leave it on or wash it off? How long should i leave it on? I read online that steam would be great to kill the spores also, as 140 kills all mold, would you suggest that?
  • We will reply to your comment shortly
    TWP Stains · 08/16/2012
    Most likely the mold was there in the wood prior. I would try a water downed bleach solution to kill the mold spores.
  • We will reply to your comment shortly
    Rick Groveman · 08/16/2012
    Used TWP 200 on my new deck boards in Georgia. Decking was pressure treated boards from Home Depot. USed TWP 200 since that what was recommended by a Decking company. Well two weeks after the application I am seeing dark spots on the boards, looking like mold. Now what do I do??:\'(
  • We will reply to your comment shortly
    TWP Stains · 07/03/2012
    You cannot apply TWP on top of a solid stain.
  • We will reply to your comment shortly
    Jeanneane · 07/03/2012
    I am redoing my wooden deck and I need to know which TWP stain would be best. It has solid acrylic stain on it now.
  • We will reply to your comment shortly
    TWP Stains · 04/19/2012
    If you are looking for a rich dark brown color then I would suggest the TWP 1500 Series in the Dark Oak.