TWP 200 Series 5 Gallon
TWP 200 Series 5 Gallon
TWP 200 Series 5 Gallon

TWP 200 Series 5 Gallon

3 Ratings 3 Reviews
$224.95
free shipping with ground services
AVAILABLE TWP 200 SERIES COLORS:
200 CLEAR, 201 CEDARTONE, 202 REDWOOD, 203 CEDAR GOLD, 205 CALIFORNIA CEDAR, 206 RUSSET, 207 BUTTERNUT BROWN, 210 SLATE GRAY

CHOOSE TWP 200 STAIN COLOR IN DROPDOWN BELOW!
Stain Color
 Back to: TWP Wood Stains

TWP 200 Series is now available to be shipped to Canada!

The TWP 200 Series was designed for shakes and shingles but can be used for all exterior wood surfaces such as fencing, log homes, cedar framed homes, etc.

TWP 200 Series is a semi-transparent oil based penetrating finish designed to extend the life of exterior wood such as cedar shake siding, and shingles. Containing a paraffin oil, TWP 200 series penetrates wood extremely well. The Paraffin oil is a "non-drying" oil that enhances the wood cells structural stability. This greatly improves the woods life and appearance.

TWP 200 Series primary function is to enhance the structural integrity and appearance of aged roofing. The finish composition will minimize grain cracking, cupping, surface erosion, water absorption and surface attack from mildew and algae.  Although the system is highly penetrative, the residual surface film is highly resistant to destructive organisms.  The penetrative portion of the product absorbs into aged and porous wood, adding bulk to aged and brittle wood fiber.  This restores lubricity and flexibility to brittle shingles.  At 94%+ solids, these products comply with all current federal and state VOC (volatile organic compounds) regulations.

TWP 200 SERIES will not crack, peel or blister making maintenance an easy task to perform for extended wood protection.

  • Compliant in all States
  • Sheds and Repels Water
  • Prolongs UV Fading
  • 8 Colors. Can take up to 30 days to cure to final color.

Material Preparation:
Due to different substrates, wood density, sanding, wiping and application methods, and atmospheric conditions, ALWAYS check actual stain color for accuracy before finish work process begins. We are not responsible for color variances following application of the product.

**TWP® 200 Clear allows wood to gray naturally

TWP 200 Series Color Chart

Gallon Sizes: 5 Gallons
Coverage Per Gallon: 150-250 square feet
Coats  Required: 1 Coat
Temperature: 45-95 F
Application Tools: Pad, Sprayer, Brush, Roller
Dry Time: 48-96 Hours.
Cleanup: Mineral Spirits
State VOC Limits: Compliant in all States
More Info: Product Data

Reviews

Saturday, 06 August 2022

The surface Prep Instructions of new Cedar Shakes calls for water wetting of the shakes 2 times, waiting at least 48 hours after each wetting step. This is to open wood grain and remove tannins from surface. Won't the wood grain close back up after the drying period is over? TWP200 is the product. thanks

Alan Rider

Monday, 15 March 2021

Worked great!

Grearnarp

Thursday, 19 October 2017

Best coating on the market for shake and shingle cedar roofs.

TWP Stains
More reviews

Please log in to write a review. Log in

Related
TWP 200 Series 1 Gallon

Gemini Restore-A-Deck Kit

Restore A Deck Stain Stripper

Restore-A-Deck Wood Brightener

Deck Floor Staining Push Brush

R-A-D-Guard-RTU-1gal-HI-RES-png

Ask a Question or Post a Picture...
You are guest ( Sign Up ? )
or post as a guest
Loading comment... The comment will be refreshed after 00:00.
  • We will reply to your comment shortly
    Lynne Kumin · 05/08/2015
    We have a new deck, put up in December. It gets direct sun most of the day. I would like to keep most of the natural wood look. Which product would be best?
  • We will reply to your comment shortly
    TWP Stains · 05/06/2015
    Randy G Goins:
    I have a pressure treated deck that has weathered for about 1 1/2 years, which one of your stains will last the longest. I live in Tennessee. The deck gets a lot of evening sun.

    For a deck you would want the 100 Series for TN.
  • We will reply to your comment shortly
    TWP Stains · 05/06/2015
    al higgins:
    Hello

    I have purchased a new home that the outside decks have been stained with California cedar # 205 shake & shingle sealant squ. # 7 44575 20505 6 I love it & need to order 5 gals. is this still available I would like to order this right away if you need to contact me 908-907-7437 I just want to make sure all is the same the can lists a date of 2007 on it.

    This color is an option to buy above.
  • We will reply to your comment shortly
    al higgins · 05/05/2015
    Hello

    I have purchased a new home that the outside decks have been stained with California cedar # 205 shake & shingle sealant squ. # 7 44575 20505 6 I love it & need to order 5 gals. is this still available I would like to order this right away if you need to contact me 908-907-7437 I just want to make sure all is the same the can lists a date of 2007 on it.
  • We will reply to your comment shortly
    Randy G Goins · 05/05/2015
    I have a pressure treated deck that has weathered for about 1 1/2 years, which one of your stains will last the longest. I live in Tennessee. The deck gets a lot of evening sun.
  • We will reply to your comment shortly
    TWP Stains · 05/04/2015
    richard bennett:
    I just purchased 5 gallons of your 210 slate grey. the grey is very hard and solid like on the bottom of the can.is not stirring up very well. any ideas?

    Have you tried a 5 gallon drill mixer that attaches to a drill? You can get them at your local paint store.
  • We will reply to your comment shortly
    richard bennett · 05/04/2015
    I just purchased 5 gallons of your 210 slate grey. the grey is very hard and solid like on the bottom of the can.is not stirring up very well. any ideas?
  • We will reply to your comment shortly
    TWP Stains · 04/06/2015
    richard bennett:
    I purchased 1 gallon of TWP slate Gray 210 several years ago . I now need to replace some deck boards and re- stain.
    Do you still sell in a single gallon container?

    Sorry but we only have it in 5 gallon pails.
  • We will reply to your comment shortly
    richard bennett · 04/06/2015
    I purchased 1 gallon of TWP slate Gray 210 several years ago . I now need to replace some deck boards and re- stain.
    Do you still sell in a single gallon container?
  • We will reply to your comment shortly
    TWP Stains · 03/28/2015
    C Shinn:
    Ive done some research and have decided on trying your product. I have rough cut red cedar I milled 3 years ago that has been stored in a shed. It will be installed vertically. I am wondering about the clear finish. If I use it will it naturally turn gray even it I kept up on maintenance and recoated as per your specs? DO you recommend coating the back side also? It will be installed with horizontal nailers about every 2 feet. The cedar is a full 1 inch thick and random widths of 6 to 8 inches wide. Also, there is some with dark red to purple in color due to not being in the sun. I assume that will fade out in a short ammount of time? Kinda kicking around the idea of the Gray color also. Do you have or know of where I could see some colors on some actual houses? Thanks for your time, as I am sure Ill have a couple more Questions.
    Regards,
    C. Shinn

    Clear will gray naturally in months. Tinted will last years. Not need to coat the backside. Not sure about the fading of the red/purple as that really depends on the wood.
  • We will reply to your comment shortly
    C Shinn · 03/27/2015
    Ive done some research and have decided on trying your product. I have rough cut red cedar I milled 3 years ago that has been stored in a shed. It will be installed vertically. I am wondering about the clear finish. If I use it will it naturally turn gray even it I kept up on maintenance and recoated as per your specs? DO you recommend coating the back side also? It will be installed with horizontal nailers about every 2 feet. The cedar is a full 1 inch thick and random widths of 6 to 8 inches wide. Also, there is some with dark red to purple in color due to not being in the sun. I assume that will fade out in a short ammount of time? Kinda kicking around the idea of the Gray color also. Do you have or know of where I could see some colors on some actual houses? Thanks for your time, as I am sure Ill have a couple more Questions.
    Regards,
    C. Shinn
  • We will reply to your comment shortly
    TWP Stains · 03/02/2015
    Evan:
    I have a 35 year old cedar shiplap (tongue and grove) siding... fairly worn stuff. My painter is reccommending the 200 series over the 1500 series. The 200 series will work on Shiplap, right? The product says that it is for shake and shingle but I assume it will work on any type of cedar well. Thanks.

    Yes it will work on this.
  • We will reply to your comment shortly
    Evan · 03/01/2015
    I have a 35 year old cedar shiplap (tongue and grove) siding... fairly worn stuff. My painter is reccommending the 200 series over the 1500 series. The 200 series will work on Shiplap, right? The product says that it is for shake and shingle but I assume it will work on any type of cedar well. Thanks.
  • We will reply to your comment shortly
    TWP Stains · 01/21/2015
    Peter Brzezicki:
    I have a hem/fir log cabin like novelty siding. It has been stained with Olympic Cedartone 4 years ago and is starting to fade. What TWP stain would be appropriate to stain over this? What cedar tone like stain is the lightest color?

    You should not apply TWP over top of an older and different stain. Best to prep first to remove the old stain and brighten the wood when done. You can use the 200 Series or the 1500 Series for this.
  • We will reply to your comment shortly
    Peter Brzezicki · 01/21/2015
    I have a hem/fir log cabin like novelty siding. It has been stained with Olympic Cedartone 4 years ago and is starting to fade. What TWP stain would be appropriate to stain over this? What cedar tone like stain is the lightest color?
  • We will reply to your comment shortly
    TWP Stains · 10/24/2014
    RK:
    Hello - I am in Michigan and had a cedar fence installed in June - a few areas have begun to gray slightly, but for the most part I like the more natural color shade and do not want to hide the rough wood grains - which stain would be best to give me a slight tint without having a painted or solid-stain appearance?

    Right now I'm leaning towards TWP200 or 203 - will that be my best bet to add a little bit of color without masking the natural look of the fence?

    Thank you for your help!

    Ryan

    200 Series is for cedar shake siding and roofs. You would want the 100 Series. None of the TWP products will give a solid or painted look. The lightest tint/color in the 100 series is the 115 Honeytone.
  • We will reply to your comment shortly
    RK · 10/23/2014
    Hello - I am in Michigan and had a cedar fence installed in June - a few areas have begun to gray slightly, but for the most part I like the more natural color shade and do not want to hide the rough wood grains - which stain would be best to give me a slight tint without having a painted or solid-stain appearance?

    Right now I'm leaning towards TWP200 or 203 - will that be my best bet to add a little bit of color without masking the natural look of the fence?

    Thank you for your help!

    Ryan
  • We will reply to your comment shortly
    TWP Stains · 10/02/2014
    Will84:
    Hello, please help. I recently received 2 estimates for a deck stain. The first guy said he would use 2 coats of TWP 100. The next person said that he would use a single coat of TWP 201. When I asked about the difference, he told me that the 201 was just a commercial grade product. I went with the second guy and today my deck was stained with 201. After reading the PDS for 200, I see that the product is intended for shakes / shingles. I am especially concerned about the statement that "the system is designed for non-traffic surfaces"

    Do I have anything to be concerned about since the 201 was applied to a surface that it wasn't intended? Do you have any info on using this product on decks?

    Thank you for any information.

    You will be fine but it may take a while to fully cure and dry.
  • We will reply to your comment shortly
    Will84 · 10/01/2014
    Hello, please help. I recently received 2 estimates for a deck stain. The first guy said he would use 2 coats of TWP 100. The next person said that he would use a single coat of TWP 201. When I asked about the difference, he told me that the 201 was just a commercial grade product. I went with the second guy and today my deck was stained with 201. After reading the PDS for 200, I see that the product is intended for shakes / shingles. I am especially concerned about the statement that "the system is designed for non-traffic surfaces"

    Do I have anything to be concerned about since the 201 was applied to a surface that it wasn't intended? Do you have any info on using this product on decks?

    Thank you for any information.
  • We will reply to your comment shortly
    TWP Stains · 09/01/2014
    Fred Icard:
    I have previously purchased TWP 206 Russet Brown stain for my cedar deck pergola, railings, and support beams. This color is not currently shown on your weg site. Has it heen discontinued? If so, what TWP product would be a good substitute?

    Looks at the 1516 Rustic as we do not carry the 206 Russet Brown.