TWP 1500 Series Deck Stain - The Best Low VOC Deck Stain

Need Help with your TWP 1500 Stain?

TWP 1500 Stain is a highly rated, EPA registered wood preservative that can be used for all types of exterior wood, siding and decking. TWP 1500 Stain will perform at its maximum potential when the wood is properly prepped and when the stain is properly applied. Unfortunately not all wood is in the same condition prior to applying the stain.

We are here to help with your project!

Please answer these few questions to achieve the best possible results with your TWP 1500 Wood and Decking Stain.

  1. info buttonAge of wood?
  2. Type of wood?
  3. Condition of the wood?
  4. Has it been stained previously and if so with what brand of stain?
  5. Small description of the area to be treated.

Ask Questions in Comment Area Below

Ask a Question or Post a Picture...
You are guest ( Sign Up ? )
or post as a guest
Loading comment... The comment will be refreshed after 00:00.
  • We will reply to your comment shortly
  • We will reply to your comment shortly
    Len · 06/17/2013
    what would you recommend for me. I have a new pressure treated deck with ceder floor. Just installed last week. Should I seal/stain it right away and if so what product do you recommend? I'd like a transparent finish. The deck is in direct sunlight all morning.
  • We will reply to your comment shortly
    Bob Y · 06/17/2013
    I have a 50 year old post and beam cottage in the Berkshires - western Massachusetts. All western red cedar with a four foot overhang consisting of beams, tongue and groove and fascia. Wood is grey with some minor pitting. I want to bring back to new look. Suggestions please!
  • We will reply to your comment shortly
    TWP Stains · 06/16/2013
    MayLouL, hard to say. It it does not dry properly then you will need to strip and and start over or possibly lightly recoat. If it does not look affected then leave it alone.
  • We will reply to your comment shortly
    TWP Stains · 06/16/2013
    Mike, use the 100 Series for this.
  • We will reply to your comment shortly
  • We will reply to your comment shortly
    MaryLouL · 06/16/2013
    Help. We just had a deck company strip, brighten and 2 weeks later stain our deck and gazebo (yesterday) with your product. An hour later we got an unexpected rain storm, and then another during the night. What will this do to the finish? The stain also ran onto the gazebo screens. Now what? Thanks
  • We will reply to your comment shortly
    Mike Warnick · 06/15/2013
    Have a new deck that is ready to be finished. Live in SE Michigan, deck on west side of home, installed in Oct2012, applied cleaner and scrubbed w/ brush two weeks ago to prep for finishing. Want to leave wood grain showing through and keep natural color as much as possible, what is best product to consider?
  • We will reply to your comment shortly
    John Peters · 06/15/2013
    wood is 1 month old cedartone decking sold by Menards. This is treated wood with an added color to simulate cedar. Have any advise on using TWP 1500 on this material?
  • We will reply to your comment shortly
    TWP Stains · 06/13/2013
    rsppjwg, you do not need to seal after the stain. Hard to say on the pail as we would need a total sq. footage including the floors, railings, and steps.
  • We will reply to your comment shortly
    rsppjwg · 06/12/2013
    5yrs, white cedar, good, Cabot natural deck 2 tiered. Does sealing after staining help longevity? If so what sealer? Will 5 gallon be enough to cover 16by 16 and 16 by 12, 5 steps and railing?
  • We will reply to your comment shortly
    TWP Stains · 06/12/2013
    Dan J, you need to apply it right away while the wood is still wet. A week or so is okay to wait.
  • We will reply to your comment shortly
    Dan Janowiak · 06/12/2013
    Just finished stripping entire cedar deck with RAD.Do I need to apply the brightener immediatly? I will also be staining with TWP 1500. How long can I let the deck sit unstained? The weather doesnt look like its going to be favorable for staining for a while.
  • We will reply to your comment shortly
    TWP Stains · 06/12/2013
    George, you would need to remove the CWF with the Restore A Deck Stain Stripper and pressure washing. Neutralize with the Restore a Deck Brightener when done. Stain with the 1500 Series.
  • We will reply to your comment shortly
    TWP Stains · 06/12/2013
    Vicky, you would want the TWP 1500 Series for this.
  • We will reply to your comment shortly
    George Adams · 06/12/2013
    15 year old pressure treated wood
    wood is rough in spots has been pressure washed & stain was partially removed by pressure washing, part of deck is covered and in good shape & has not been pressure washed
    It was stained previously, using flood cfw-uv
  • We will reply to your comment shortly
    Vicky · 06/11/2013
    8 years old...pressure washed with Jomax and bleach...repaired...VA full morning sun...
  • We will reply to your comment shortly
    TWP Stains · 06/10/2013
    Wait 4 months, clean and brighten, then apply 1 coat of the TWP.
  • We will reply to your comment shortly
    Aaron H. · 06/10/2013
    Age of wood? 1 month
    Type of wood? Kiln Dried Pine (Yellawood)
    Condition of the wood? New
    Has it been stained previously and if so with what brand of stain? No
    Small description of the area to be treated.
    10X20 open deck, full sun in upstate South Carolina.

    I am planning on sealing with TWP 1500 in natural. I know you are supposed to wait at least 4 months on Pressure Treated wood, but because it's Kiln Dried my contractor said to stain/seal right away (or at least within a month). I was planning on pressure washing, wait 2 days, and then apply TWP 1500. What are your thoughts?
  • We will reply to your comment shortly
    TWP Stains · 06/09/2013
    Joyce, Either would be fine but for this I would suggest the 1500 Series.