TWP 1500 Series Deck Stain - The Best Low VOC Deck Stain

Need Help with your TWP 1500 Stain?

TWP 1500 Stain is a highly rated, EPA registered wood preservative that can be used for all types of exterior wood, siding and decking. TWP 1500 Stain will perform at its maximum potential when the wood is properly prepped and when the stain is properly applied. Unfortunately not all wood is in the same condition prior to applying the stain.

We are here to help with your project!

Please answer these few questions to achieve the best possible results with your TWP 1500 Wood and Decking Stain.

  1. info buttonAge of wood?
  2. Type of wood?
  3. Condition of the wood?
  4. Has it been stained previously and if so with what brand of stain?
  5. Small description of the area to be treated.

Ask Questions in Comment Area Below

Ask a Question or Post a Picture...
You are guest ( Sign Up ? )
or post as a guest
Loading comment... The comment will be refreshed after 00:00.
  • We will reply to your comment shortly
    Mike Shafer · 09/29/2014
    20 y/o pressure treated pine--average some splitting---coated with Behr semi transparent Deck Stain. Existing coating is worn and peeled a (only 2 years) can get about 50-75% off using sodium Hydroxide--sanding may get it to 90% off Would like to use Penetrating oil stain but am concerned about performance going over a surface previously coated with acrylic stain.
  • We will reply to your comment shortly
    Bill Kirkpatrick · 09/29/2014
    Some deck floor boards (standard treated pine) replaced 4 months ago, the rest are close to 18 years old. Deck has been powerwashed. Should deck cleaner be used? How do I blend in the new boards with the old? Is there a better color (darker) I should use to blend in the boards?

    Thank you
  • We will reply to your comment shortly
    TWP Stains · 09/25/2014
    JT:
    Trying to put together which stain is recommended for my application and what all products you recommend to do the job correctly I live in western South Dakota where we have extreme heat and cold. I have a 5 year old cedar deck that has been stained twice with Ultra advanced alkyd oil formula I am unhappy with previous brand since I don't seem to make it even a year before the stain looks worn. The deck is exposed to the sun for most of the day and has very little traffic. I am looking for a product that will hold up better and what you recommend for the entire prep. THe deck is @2000 square feet

    First off you will need to remove the Ultra before applying the TWP. This will not be easy with two coats of the Acrylic. You can use the Restore A Deck Stripper and pressure washing to remove what you can but you will probably need to sand the rest off. Once the old stain is removed from the deck you will need to apply the RAD wood brightener. After wood is prepped you will be able to apply the TWP 1500.
  • We will reply to your comment shortly
    TWP Stains · 09/25/2014
    Horsekisser:
    Hi,

    This is a follow-on to my previous question today. The deck is pressure treated wood. Not sure if white pine. Almost has a grain pattern like oak. I'm using Dark Oak stain.

    Robin

    It will not continue to absorb at this point so best to wipe done the excess stain with mineral spirits and rags now. Saturate rags with water when done to avoid accidental spontaneous combustion.
  • We will reply to your comment shortly
    JT · 09/24/2014
    Trying to put together which stain is recommended for my application and what all products you recommend to do the job correctly I live in western South Dakota where we have extreme heat and cold. I have a 5 year old cedar deck that has been stained twice with Ultra advanced alkyd oil formula I am unhappy with previous brand since I don't seem to make it even a year before the stain looks worn. The deck is exposed to the sun for most of the day and has very little traffic. I am looking for a product that will hold up better and what you recommend for the entire prep. THe deck is @2000 square feet
  • We will reply to your comment shortly
    Mary R Sumlin · 09/24/2014
    Hi,

    This is a follow-on to my previous question today. The deck is pressure treated wood. Not sure if white pine. Almost has a grain pattern like oak. I'm using Dark Oak stain.

    Robin
  • We will reply to your comment shortly
    Mary R Sumlin · 09/24/2014
    Wood is 2 years old
    Oak
    Good - clean,dry,and mold free
    Has not been stained
    Large deck

    I applied the TWP 1500 series to the deck floor by rolling and brushing. The deck is mostly shaded but does get a couple hrs of filtered sun per day.Some of the planks have absorbed the oil and are almost dry (more in the sunny area). Some of the wood has not and there are shiny spots. It has been about a week and the shiny spots are still there. The weather is cool (70's) and dry. I tested the wood before I started to stain because the previous week it rained a little almost every day. It seemed OK to stain because the wood absorbed the water in about 20 mins. The spindles that I stained turned out nice with no shiny spots. Should I continue to wait and see of more oil is absorbed or take mineral spirits and rags and wipe off the shiny spots. Appreciate your help.
  • We will reply to your comment shortly
    TWP Stains · 09/21/2014
    AJ:
    Deck is two years old, has been stained one time last year with cabots oil based stain. Not happy with stain and looking to restain with TWP 1500. Have stripped floor of deck with pressure washer down to bare wood. Would like to apply TWP over Cabots on rails, steps and stripped floor. Is there any reason to strip the rails, steps, etc prior to applying stain? Large deck and would like not to have to strip entire thing if not necessary. We live in Georgia and the deck is in a fairly shady area. Please advise.

    You cannot apply TWP over the Cabot. You will need to strip that as well.
  • We will reply to your comment shortly
    AJ · 09/21/2014
    Deck is two years old, has been stained one time last year with cabots oil based stain. Not happy with stain and looking to restain with TWP 1500. Have stripped floor of deck with pressure washer down to bare wood. Would like to apply TWP over Cabots on rails, steps and stripped floor. Is there any reason to strip the rails, steps, etc prior to applying stain? Large deck and would like not to have to strip entire thing if not necessary. We live in Georgia and the deck is in a fairly shady area. Please advise.
  • We will reply to your comment shortly
    TWP Stains · 09/16/2014
    Kathleen Owen:
    1. new deck - 2 weeks
    2. pressure treated yellow pine 2 x 6
    3. very good
    4. never stained or sealed
    5. 16' x 22' deck in Ohio - east side of
    house

    Please read about TWP and new wood here:
    http://www.twpstainhelp.com/prepping-new-wood-for-twp-stains/
  • We will reply to your comment shortly
    Kathleen Owen · 09/15/2014
    1. new deck - 2 weeks
    2. pressure treated yellow pine 2 x 6
    3. very good
    4. never stained or sealed
    5. 16' x 22' deck in Ohio - east side of
    house
  • We will reply to your comment shortly
    TWP Stains · 09/11/2014
    Greg Royse:
    Age of wood -- 1 year
    Type of wood -- pressure treated Pine
    Condition of wood -- excellent
    Has been stained before - No, ready for 1 st time
    I live in central South Carolina, I understand I needed to wait a year, which is now. Is the TWP 1500 a good choice for me and where would I purchase

    For SC you should use the TWP 100 Series. Prep first with the Gemini Restore Kit. You can order both from our website.
  • We will reply to your comment shortly
    Greg Royse · 09/11/2014
    Age of wood -- 1 year
    Type of wood -- pressure treated Pine
    Condition of wood -- excellent
    Has been stained before - No, ready for 1 st time
    I live in central South Carolina, I understand I needed to wait a year, which is now. Is the TWP 1500 a good choice for me and where would I purchase
  • We will reply to your comment shortly
    TWP Stains · 09/10/2014
    Dave Names:
    I have a 900 sq. ft. pressure-treated deck that was last treated with Sickens in 2000. Most of the deck and railings are pretty bare. Under my overhang however is a small area, about 100 sq. ft. where evidently the Sickens is still protecting.
    I am impressed with what I'm reading about your 1500 Series stain but am concerned with the area under the overhang.
    Please provide step by step prep instructions for the entire deck, including under the overhang and railings and under the deck. Sanding required on deck and railings? I have met with many contractors and some powerwash, some use a chemical treatment. Which do you recommend?
    This represents a large investment and I don't want to make a mistake in preparation. If your product is oil -based, will it have to be stripped down the road to retreat?
    Where do I purchase your product near Fredericksburg, VA.? Please reply to my email. Thanks.

    Remove the Sikkens first with the Restore deck stain stripper and pressure washer. Use the Gemini Restore Kit for the rest of the wood. Sand only if needed to remove the rest of the Sikkens that did not come off. TWP is oil based and can be cleaned and reapplied as needed without stripping. We ship to VA.
  • We will reply to your comment shortly
    Dave Names · 09/09/2014
    I have a 900 sq. ft. pressure-treated deck that was last treated with Sickens in 2000. Most of the deck and railings are pretty bare. Under my overhang however is a small area, about 100 sq. ft. where evidently the Sickens is still protecting.
    I am impressed with what I'm reading about your 1500 Series stain but am concerned with the area under the overhang.
    Please provide step by step prep instructions for the entire deck, including under the overhang and railings and under the deck. Sanding required on deck and railings? I have met with many contractors and some powerwash, some use a chemical treatment. Which do you recommend?
    This represents a large investment and I don't want to make a mistake in preparation. If your product is oil -based, will it have to be stripped down the road to retreat?
    Where do I purchase your product near Fredericksburg, VA.? Please reply to my email. Thanks.
  • We will reply to your comment shortly
    TWP Stains · 09/09/2014
    Khouri:
    I just finished wrapping my pressure treated railing posts in 1x6 flat cedar stock, and my deck rails are made out of kiln dried Douglas Fir (top/bottom rails as well as cap), how long do I have to wait to stain them (Wil be using the TWP 1500 as I live in MA) and is there any prep work that I have to do beforehand?

    [b][i]So I should let everything weather over the winter and then prep and stain it in the spring?[/i][/b]

    Please read this article:
    http://www.twpstainhelp.com/prepping-new-wood-for-twp-stains/
  • We will reply to your comment shortly
    Shirley Atkins · 09/08/2014
    I have about 400 square feet of deck previously stained with Benjamin Moore semi transparent. Have sanded as much of the previous finish off as possible. Mostly down to bare wood.
  • We will reply to your comment shortly
    Jake43 · 09/08/2014
    I applied TWP 1500 stain to my ~ 20 yr old deck a few weeks ago. More than a week after the stain was applied, we got a heavy rain storm. The stain looked fine afterwards, but the rain pooled all over the deck. I'm talking about puddles, not just little beads of water. We've gotten rain twice since then and the same thing has happened each time - lots of rain remains on the boards and does not evaporate, even 10 hours after the storm it's still very wet. After each storm I've brushed the water off with a broom. Never had this problem before I restained the deck.

    How long will the rain continue to pool? And is it necessary to brush the water off (or will it cause any damage if it isn't brushed)? Appreciate any other suggestions, thanks for your help.
  • We will reply to your comment shortly
    Khouri · 09/08/2014
    I just finished wrapping my pressure treated railing posts in 1x6 flat cedar stock, and my deck rails are made out of kiln dried Douglas Fir (top/bottom rails as well as cap), how long do I have to wait to stain them (Wil be using the TWP 1500 as I live in MA) and is there any prep work that I have to do beforehand?

    [b][i]So I should let everything weather over the winter and then prep and stain it in the spring?[/i][/b]
  • We will reply to your comment shortly
    TWP Stains · 09/08/2014
    Khouri:
    I just finished wrapping my pressure treated railing posts in 1x6 flat cedar stock, and my deck rails are made out of kiln dried Douglas Fir (top/bottom rails as well as cap), how long do I have to wait to stain them (Wil be using the TWP 1500 as I live in MA) and is there any prep work that I have to do beforehand? Thanks

    When using TWP you should wait 4-12 months for the stain. Prep with the Gemini Restore kit.