TWP 1500 Series 5 Gallon and R-A-D Stripper/Brightener Kit

$299.00
free shipping with ground services
AVAILABLE TWP 1500 SERIES COLORS:
1500 CLEAR, 1501 CEDARTONE, 1502 REDWOOD, 1503 DARK OAK, 1504 BLACK WALNUT, 1511 CALIFORNIA REDWOOD, 1515 HONEYTONE, 1516 RUSTIC, 1520 PECAN, 1530 NATURAL

CHOOSE STAIN COLOR IN DROPDOWN BELOW!
Stain Color
 Back to: TWP Wood Stains

TWP 1500 Series Photo Album2TWP Stain Calculator

TWP 1500 Series Stain and Restore A Deck Stripper and Brightener Combo Pack

This Combo Kit comes with 5 Gallons of TWP 1500 Series, 1 Restore A Deck Stain Stripper and 1 Restore A Deck Wood Brightener for prepping by removing previous coatings from your wood.

TWP 1500 Colors1 RAD Stripper and 1 RAD Brightener

Restore-A-Deck Stripper and Remover is a powdered concentrated deck stain stripper that makes 5 liquid gallons.

When applied through a pump sprayer, the RAD stripper can remove most transparent, semi-transparent, and semi-solid deck stains. Total coverage is 500-1000 sq feet per 5 gallons when mixed.

The Restore-A-Deck Stain Stripper needs to be neutralized and this combo kit comes with the Restore-a-Deck Wood Brightener. The brightener covers 750-1000 sq feet per 5 gallons when mixed.

The Restore-A-Deck Stain Stripper needs to be neutralized and this combo kit comes with the Restore-a-Deck Wood Brightener.

Removes:

  • Transparent and Semi-Transparent Oil-Based Stains
  • Most Semi-Transparent Water-Based Stains
  • Water Sealers

Important Note: Restore-A-Deck Stain Stripper may not fully remove Solid Color Wood Stains, Paints, Varnishes, and Excessively Over-Applied Acrylic Semi-Transparent and Semi-Solid Coatings. To remove these deck and wood stain types, use the RAD Paint & Solid Stain Strippernt.

1 TWP 1500 Series 5 Gallon Pail

TWP 1500 is a Semi-transparent Oil-Based wood stain and preservative that is allowed in all 50 states.

The TWP® 1500 formula is designed to penetrate better, dry faster, and outperform the previous TWP® 500 series formula.

TWP® 1500 Series is an EPA registered wood preservative which prevents structural damage and wood decay on exterior above ground wood surfaces such as fencing, decking, wood siding, log homes, and roofing. TWP® 1500 Series resists water absorption that causes warping, cracking, and splitting as well as preventing freeze damage in colder climates.

TWP® 1500 Series is a low VOC preservative with special U.V. absorbing pigments that prevent unsightly wood graying, darkening, and fading. The selected mildewcides inhibit the growth of mold and mildew which assist in preventing premature discoloration.

TWP® 1500 Series will keep your wood beautiful, fresh, and looking new longer. The ease of application and maintenance will allow you to enjoy your investment for years to come.

TWP 1500 Series Stain QuestionsKey Features

  • Preserves natural wood color
  • EPA registered wood preservative
  • Professional choice for all exterior wood surfaces
  • Semi-transparent stain preserves natural color
  • Sheds water longer
  • Prevents mold and mildew
  • Helps to prevent wood rot
  • Easy to apply and can be cleaned and recoated as needed
  • Helps in the prevention of warping, cracking, and splitting
  • Low 250 VOC formula, compliant in 50 states

*We do not guarantee stain colors as they will vary widely depending on the wood type, age of wood, prepping of wood, and application. Small samples are available.

 

Have Questions on Prep and Application?

Visit our Help Site for all the answers!

TWP Stain HELP

Gallon Sizes: 1's & 5's
Stain Type: Semi-Transparent Oil-Based
Coverage Per Gallon: 150-200 square feet
Coats  Required: 1-2 Coats. "Wet on Wet"
Temperature: 45-95 F
Application Tools: Pad, Sprayer, Brush, Roller
Dry Time: 12-72 Hours
Cleanup: Mineral Spirits
State VOC Limits: Compliant in all States
More Info:

Product Data

TWP 1500 Series Info

 

Reviews

Thursday, 19 October 2017

Save $ with the TWP 1500 and RAD Stripper/Brightener kit!

TWP Stains

Please log in to write a review. Log in

Ask a Question or Post a Picture...
You are guest ( Sign Up ? )
or post as a guest
Loading comment... The comment will be refreshed after 00:00.
  • We will reply to your comment shortly
    Tony · 08/16/2023
    Hello,  I'm putting up one of the yardistry cedar gazebos which I believe has some type of finish on it already.  Will the 1500 apply over this?  If not and I use the stripper, will the stripper damage my stained concrete patio?
    Thank you for any help!
  • We will reply to your comment shortly
    Lionel Johnson · 06/21/2023
    I last stained my deck in 2020 with TWP 1501 and have 2x unopened 5 gallon cans left over from that staining. They were purchased in September 2020. 
    Will they still be useable?

    Similarly, I have several unopened pots of Restore-a-Deck Cleaner and Brightener from the same date. Same question applies - will they still be useable?

    Thanks
    • We will reply to your comment shortly
      TWP Stains · 06/21/2023
      Shelf life is 2-3 years for the stain so hard to say for certain. Prep will be fine if in powder form.
      • We will reply to your comment shortly
        Lionel Johnson · 06/21/2023
        Yes, the prep is still in powder form.

        Is there any way to evaluate the stain?

        Thanks
        • We will reply to your comment shortly
          TWP Stains · 06/22/2023
          Open and mix evenly. If it is smooth and without large clumping, then you should be okay.
  • We will reply to your comment shortly
    Wesley · 05/04/2023
    Prior application of 1504 came out a bit uneven last fall. Would your advice be to strip and brighten and reapply? 
    • We will reply to your comment shortly
      TWP Stains · 05/04/2023
      Yes, easy to do with the stripper/brightener kit.
      • We will reply to your comment shortly
        Wesley · 05/05/2023
        Many thanks for your help. The prep looks good. I am very worried about over-applying the product. Do you have any advice about technique to avoid this during application--how much is too much? Rain at 40% chance in forecast about 25 hours after applying would you chance it? 
  • We will reply to your comment shortly
    Tom Hillyer · 08/11/2021
    I have used TWP 101 on my decks.  I live in Colorado and 101 is no longer allowed so I want to switch to 1501.  Do I need to strip and brighten prior to switching to 1501?
  • We will reply to your comment shortly
    Bryan · 02/28/2021
    I have stained with 1500 TWP abt year and half ago , I have lots of mildew that will not just rinse off with light pressure washer. Shoukd i strip bd restore before I stain for the second time? I don’t want it any darker so I thought abt using 5 gallons of the color and 5 gallons of the clear. And I want to put 2 coats on it this time. Please let me know if I need to strip first or just use the cleaner. Thanks
    • We will reply to your comment shortly
      TWP Stains · 03/01/2021
      Best to not mix with the clear, use the same color as before. Strip and brighten for prep is the easiest way.
  • We will reply to your comment shortly
    Stacey · 10/20/2020
    Hello, I am wondering if you can suggest how I can protect my deck for winter (such as just cleaning and removing mildew) before it gets stripped, brightened, and stained in Spring. I do not see the dry days needed to stain before temps drop. It currently has a semi-transparent stain that is failing in most areas. The deck is 8-10 years old, exposed to full sun/snow, species is probably pine, mold/mildew in some areas.
    • We will reply to your comment shortly
      TWP Stains · 10/20/2020
      It is fine to leave as is until Spring.
  • We will reply to your comment shortly
    Heather · 10/20/2019
    Hello! When you say: "The Restore-A-Deck Stain Stripper needs to be neutralized and this combo kit comes with the Restore-a-Deck Wood Brightener." is the neutralizer in this combo kit? It sounds like you're saying the stripper needs to be neutralized by the brightener, which is included, but I want to make sure.

    Thanks!
    • We will reply to your comment shortly
      TWP Stains · 10/21/2019
      The Brightener does neutralize and is in this kit.
  • We will reply to your comment shortly
    Teresa · 07/04/2019
    Looks like only 3 of my photos loaded . Here is the wet deck.
  • We will reply to your comment shortly
    Teresa · 07/04/2019
    Hi! Looking to bring the color back to our 2 year old red cedar deck. We want it to always look like it currently looks only when wet. Can you recommend how to get that? It has never been sealed or stained since it was installed summers ago. We have these weird white fuzzy areas and wondering what to do about those as well. This May we had an additional deck put on (the raised deck) and want them to match, but not sure if we should do anything to that one just yet. Any advice is appreciated! We live in northern IL and the deck is by a pool and gets full sun most of the summer days. Thank you!
  • We will reply to your comment shortly
    Conor O Dea · 05/01/2019
    I’m unsure as to what process / product to use on my dated deck (see pics).
    I would ideally like a low maintenance deck if possible.
    Any help/product recommendations would be greatly appreciated.

    – Deck Location: New Jersey
    – Deck condition: 5-10 years old??
    – Deck exposure: Full exposure to all elements (Full Sun/snow etc.)
    – Wood Type: Unsure
    – Mold or Mildew Issues: Yes
    – Previous Stain Product: unknown

    thanks in advance for your help!
    • We will reply to your comment shortly
      TWP Stains · 05/01/2019
      Strip off what you can. Sand the rest off. Brightener when finished. Stain with TWP 1500 Series.
  • We will reply to your comment shortly
    Betty Edson · 06/20/2018
    10 by 50 deck surface new, dry, pressure treated. Support posts same. underneath deck surface 10 foot supports and faces of 13 steps are some brand of green semitransparent stain. 10 by 10 porch grayed never treated 10 yr. old PT wood. what prep products are needed and how much.
  • We will reply to your comment shortly
    Kim · 05/13/2018
    Can I use this product when the deck is wet from rain?
    • We will reply to your comment shortly
      TWP Stains · 05/13/2018
      The prep kits, yes. The stain, no.
      • We will reply to your comment shortly
        Kim · 05/13/2018
        Great, thank you! The wood needs to be dry for 48 hours before and after stain right?
        • We will reply to your comment shortly
          TWP Stains · 05/14/2018
          Correct but it can take a rain in most cases within 12-24 hours after applying.
  • We will reply to your comment shortly
    Barbara · 05/04/2018
    Is the $20.00 rebate instant, and if not, how do I claim it?
  • We will reply to your comment shortly
    Mwells · 05/04/2018
    after stripping can you wait a day to use brightner or does it need to be done right away?
    • We will reply to your comment shortly
      TWP Stains · 05/04/2018
      Best to do it right away if at all possible. Very easy to do.
  • We will reply to your comment shortly
    Ancel · 02/04/2018
    My dock and deck were treated by the previous owner with TWP. DO I need to strip it before applying 1500, or should I just clean and brighten the surfaces?
    • We will reply to your comment shortly
      TWP Stains · 02/04/2018
      Could you please post a picture of the current condition so we can properly advise?
  • We will reply to your comment shortly
    TWP Stains · 07/09/2017
    Neil Hauger:
    Plan to strip and reapply two 1500 cedarctome to my previously Twp stained cedar deck. It has been stained twice before with Twp.
    Deck is apx 455sq ft plus rail cap boards. Will one 5gallon stain plus stripper/brightene kit suffice?

    Yes, it should be enough.
  • We will reply to your comment shortly
    Neil Hauger · 07/08/2017
    Plan to strip and reapply two 1500 cedarctome to my previously Twp stained cedar deck. It has been stained twice before with Twp.
    Deck is apx 455sq ft plus rail cap boards. Will one 5gallon stain plus stripper/brightene kit suffice?
  • We will reply to your comment shortly
    TWP Stains · 05/30/2017
    DavidDoubleOSeven:
    I have a deck that has semi-solid finisher (of some kind) on it, but the most traveled places are stripped bare. Do I need both kits to prep for refinishing?

    Just the stripper kit.
  • We will reply to your comment shortly
    DavidDoubleOSeven · 05/30/2017
    I have a deck that has semi-solid finisher (of some kind) on it, but the most traveled places are stripped bare. Do I need both kits to prep for refinishing?
  • We will reply to your comment shortly
    TWP Stains · 05/29/2016
    Donald Hundley:
    I want to strip and brighten my 320 SF deck of previously applied Behr semi-transparent cedar color. Which stripper and brightener is best, and how much will I need? Also, how much TWP 1500 will I need to apply?

    You will need about 3-4 gallons for two coats. You will need the Restore A Deck Stripper and a pressure washer to remove the Behr.