TWP 1500 Series Deck Stain 1 Gallon
TWP 1500 Series Deck Stain 1 Gallon
TWP 1500 Series Deck Stain 1 Gallon
TWP 1500 Series Deck Stain 1 Gallon Color Chart
TWP 1500 Series Deck Stain 1 Gallon Color Chart
TWP 1500 Series Deck Stain 1 Gallon Color Chart

TWP 1500 Series 1 Gallon

2 Ratings 2 Reviews
$46.99
AVAILABLE TWP 1500 SERIES COLORS:
1500 CLEAR, 1501 CEDARTONE, 1502 REDWOOD, 1503 DARK OAK, 1504 BLACK WALNUT, 1511 CALIFORNIA REDWOOD, 1515 HONEYTONE, 1516 RUSTIC, 1520 PECAN, 1530 NATURAL

CHOOSE STAIN COLOR IN DROPDOWN BELOW!
Stain Color
 Back to: TWP 1500 Series

TWP 1500 Series Photo Album2 TWP 1500 Series Deck Stain 1 Gallon Calculator

TWP 1500 Series 1 Gallon ColorsTWP 1500 1 Gallon Stain

TWP 1500 is a Semi-transparent Oil-Based wood stain and preservative that is allowed in all 50 states.

The new TWP® 1500 formula is designed to penetrate better, dry faster and outperform the previous TWP® 500 series formula.

TWP® 1500 Series is an EPA registered wood preservative which prevents structural damage and wood decay on exterior above ground wood surfaces such as fencing, decking, wood siding, log homes, and roofing. TWP® 1500 Series resists water absorption that causes warping, cracking and splitting as well as preventing freeze damage in colder climates.

TWP® 1500 Series is a low VOC preservative with special U.V. absorbing pigments that prevent unsightly wood graying, darkening and fading. The selected mildewcides inhibit the growth of mold and mildew which assist in preventing premature discoloration.

TWP® 1500 Series will keep your wood beautiful, fresh and looking new longer. The ease of application and maintenance will allow you to enjoy your investment for years to come.

TWP 1500 Series Stain QuestionsKey Features

  • Preserves natural wood color
  • EPA registered wood preservative
  • Professional choice for all exterior wood surfaces
  • Semi-transparent stain preserves natural color
  • Sheds water longer
  • Prevents mold and mildew
  • Helps to prevent wood rot
  • Easy to apply and can be cleaned and recoated as needed
  • Helps in the prevention of warping, cracking and splitting
  • Low 250 VOC formula, compliant in 50 states
*We do not guarantee stain colors as they will vary widely depending on the wood type, age of wood, prepping of wood, and application. Small samples are available.

1500 Series and Deck Stain 1 Gallon

 

Have Questions on Prep and Application?

Visit our Help Site for all the answers!

TWP Stain HELP

Gallon Sizes: 1's & 5's
Stain Type: Semi-Transparent Oil-Based
Coverage Per Gallon: 150-200 square feet
Coats  Required: 1-2 Coats. "Wet on Wet"
Temperature: 45-95 F
Application Tools: Pad, Sprayer, Brush, Roller
Dry Time: 12-72 Hours
Cleanup: Mineral Spirits
State VOC Limits: Compliant in all States
More Info:

Product Data

TWP 1500 Series Info

 

Reviews

Wednesday, 02 October 2019

We have used this product twice on our pressure-treated wood deck (. It applies easily and looks terrific when done. We are DIYers with limited experience with this sort of project, and had no trouble following the application directions. We had to address a lot of wood damage before applying it--severe UV damage, mold and mildew--but with the right prep, we couldn't be happier with the outcome. The second time we used it, we did over-apply a bit and had a lot of shiny excess stain after a few hours of drying. We read the tips here on the website and the next day we wiped off the excess using a light misting of mineral spirits and shop rags. Easy fix and it looks great. Never any peeling, which is just what we wanted, and it made our heavily damaged wood look better than we thought possible. I love finding a product that works as well as advertised.

Julia

Thursday, 19 October 2017

A true oil-based wood preservative that is allowed in all 50 states!

TWP Stains

Please log in to write a review. Log in

Related
TWP 1500 Series Deck Stain 5 Gallon

Gemini Restore-A-Deck Kit

Restore A Deck Stain Stripper and Brightener Kit

Deck Floor Staining Push Brush

R-A-D-Guard-RTU-1gal-HI-RES-png

Bug Juice For 1 Gallon of Stain

Ask a Question or Post a Picture...
You are guest ( Sign Up ? )
or post as a guest
Loading comment... The comment will be refreshed after 00:00.
  • We will reply to your comment shortly
    Les Olson · 04/08/2014
    What would be the shipping cost for two gallons of TQP 1500 stain?

    My address is 150 Teresa Court in Bowling Green, Kentucky.

    Thanks.
  • We will reply to your comment shortly
    TWP Stains · 04/03/2014
    Bruce,

    Only the TWP 1500 series is allowed in your state due to VOC laws.
  • We will reply to your comment shortly
    BruceA · 04/02/2014
    We have a brand new cedar deck installed Sept 0f 2013. It is time to think about treating it. We live in central Ohio. The summers and winters can be brutal. Other then keeping it debris free nothing has been done to the deck. We plan on using your cleaner brightener to start. Which series of TWP do you recommend.

    Bruce
  • We will reply to your comment shortly
    TWP Stains · 03/12/2014
    I would use the Gemini Restore Kit for the prep. You should use a little less but hard to say. If the unused portion is sealed 100% then it should be okay.
  • We will reply to your comment shortly
    Dominic · 03/12/2014
    Applied TWP 1500 Cedar-tone to my deck last year. I am contemplating a maintenance coat this spring. Do I use the Gemini deck restore and brightener or something else?
    I used about 4-1/2 gals out of the 5-gal pail last year. Since it is a maintenance coat, will I use less this year? If I order another 5-gal pail, is it possible to reseal the unused portion to use the following year?
  • We will reply to your comment shortly
    Diana · 01/21/2014
    Where can I buy this product locally. I live in Sacramento, CA
  • We will reply to your comment shortly
    TWP Stains · 09/13/2013
    Patrick, The lightest tint is the Honeytone. Please read this for help: http://www.twpstainhelp.com/twp-1500-colors-explained/
  • We will reply to your comment shortly
    Patrick V · 09/13/2013
    I've just installed a cedar pergola and would like to preserve this natural cedar coloring as much as possible without darkening (or at least minimally darkening) the tone. I am wondering if the Cedartone 1500 color would be the best choice or if a another more 'neutral' tone would better preserve the natural cedar color. Thanks.
  • We will reply to your comment shortly
    TWP Stains · 09/13/2013
    Jane, http://www.twpstainhelp.com/prepping-new-wood-for-twp-stains/
  • We will reply to your comment shortly
    Jane Pletscher · 09/13/2013
    Our builder is installing a new cedar porch ( 6' by 12' ) and 6 steps. Should we stain it now or wait to stain it?
  • We will reply to your comment shortly
    Lance Starck · 08/29/2013
    Where can I buy TWP 1500 locally? I live in the San Francisco Bay area.
  • We will reply to your comment shortly
    TWP Stains · 08/26/2013
    John, we sell actual samples of the stain to test on your wood:
    http://www.twpstain.com/stain-samples
  • We will reply to your comment shortly
    John Deaton · 08/26/2013
    Is it possible to get some color cards from you to use to select which product to order?
    Thank you
  • We will reply to your comment shortly
    TWP Stains · 08/25/2013
    Yimin, sure you can skip the sanding. It is not a must.
  • We will reply to your comment shortly
    Yimin You · 08/25/2013
    Hi, I am really tired after stripping, brightening, washing, all of them TWO times in order to remove the previous stain.

    Now, Is it a MUST to lightly sand the short fuzzy thing? Can I just leave it there and proceed to stain with TWP?

    If I sand, I have to knock down the nails, then sand by hand, then water wash....Would it be OK to skip this step? I think I may be taking on more than I can handle now....

    Thanks
  • We will reply to your comment shortly
    TWP Stains · 08/25/2013
    Yimin, this is normal when using a stripper. Try to lightly sand the deck with 60 grit paper. When done rinse the deck down well to remove the sand dust.
  • We will reply to your comment shortly
    Yimin You · 08/24/2013
    I stripped with Behr stripper, washer/brightener. Now some of the wood board has a layer of fuzzy very short "hair", the color of wood. Is it something that I did not wash/scape off, or is it wood fiber? Did I do something wrong? I did not use power wash. Just regular garden hose with a nozzle that can concentrate water stream and kind of like power wash.

    Do I need to sand off the fuzzy short "hair" before stain?

    thanks for your advice.
  • We will reply to your comment shortly
    TWP Stains · 08/24/2013
    Kevin, cleaner and brightener will remove the mill glaze.
  • We will reply to your comment shortly
    Kevin McGinty · 08/23/2013
    Before staining a new pressure treated lumber deck in western PA, some suggest I sand surfaces to get rid of mill glaze, others say don't sand, just use a cleaner/brightner to remove glaze - what do you recommend?
  • We will reply to your comment shortly
    TWP Stains · 08/21/2013
    Possibly but it depends on your traffic and wearing.