Restore A Deck Stain Stripper and Brightener Kit
Restore A Deck Stain Stripper and Brightener Kit
Restore A Deck Stain Stripper and Brightener Kit
Restore A Deck Stain Stripper and Brightener Kit

Restore A Deck Stripper/Brightener Kit

1 Rating 1 Shopper Review
$74.99
free shipping with ground services
 Back to: Wood Deck Strippers-Professional Grade

 1 RAD Stripper and 1 RAD Brightener

Coverage: 750-1000 sq. feet per kit. Each Kit Makes 5 Gallons of Stain Stripper and 5 Gallons of Wood Brightener

Note: The Restore-A-Deck Stain Stripper needs to be neutralized with the included Restore-a-Deck Wood Brightener.

DESCRIPTION
Restore-A-Deck Wood Stain Stripper is a biodegradable, powdered concentrate that quickly removes worn finishes to restore wood surfaces. Stains and deck coatings are removed along with collected dirt, mold, mildew and mill glaze.

This product is Step 1 Stripper of the Restore A Deck system.

WHERE TO USE
Restore-A-Deck Wood Stain Stripper removes most oil and latex based finishes including: clear sealers, transparent stains, and semi-transparent stains.

SURFACE PREPARATION:
Surfaces to be stripped must be above 50°F. Protect adjacent surfaces; cover with plastic sheets and/or tape off any adjacent areas not being stripped. Thoroughly wet and/or cover plants and shrubs. Rinsing residue will not harm plants or roots. Exposure to full strength product will burn foliage. 

ADVANTAGES

  • #1 Rated Wood Deck Stain Stripper
  • Removes most clear, transparent, semi-transparent, and semi-solid coatings.
  • Powdered formula makes 5 liquid gallons when mixed
  • Extremely cost effective. When mixed, the cost is less than $7 a gallon.
  • Eco-Safe formulas
  • Preps previously stained wood and decks
  • Safe to use on all exterior wood surfaces, not just decks
  • Applied with pump sprayer for max results
  • Can be mixed at a stronger ratio for difficult to remove finishes. Max would be 3 gallons of water to one container of Restore-A-Deck Stripper

Coverage: 500-1000 sq.feet per container

Removes:

  • Transparent and Semi-Transparent Oil-Based Stains
  • Most Semi-Transparent Water-Based Stains
  • Water Sealers

Important Note: Restore-A-Deck Stain Stripper may not fully remove Solid Color Wood Stains, Paints, Varnishes, and Excessively Over-Applied Acrylic Semi-Transparent and Semi-Solid Coatings. To remove these deck and wood stain types, use the RAD Paint & Solid Stain Stripper

TWP Stain Calculator

 

 

 

Have Questions on Prep?

Visit our Help Site for all the answers!

TWP Stain HELP

Reviews

Thursday, 19 October 2017

Great stripper for prepping. The brightener restores wood grain and color.

TWP Stains

Please log in to write a review. Log in

Related
chapin_clean

Restore-A-Deck Stripper Booster

Restore-A-Deck Wood Stain Thickening Gel Booster

R-A-D-PaintStrip-1gal-HI-RES

Ask a Question or Post a Picture...
You are guest ( Sign Up ? )
or post as a guest
Loading comment... The comment will be refreshed after 00:00.
  • We will reply to your comment shortly
    Frank · 07/28/2020
    I applied twp stain (1501 cedartone) to cedar deck boards and railings 2+ years ago. High traffic areas are showing silvery indicating loss of protectant. Can I strip remaining and reapply or is sanding required? Do you recommend additives for the vertical ballisters?
  • We will reply to your comment shortly
    Paula · 07/07/2020
    I don't understand the need for Restore-A-Deck kit and thickening gel and booster. Thank you
  • We will reply to your comment shortly
    Kevin · 07/06/2020
    Front
  • We will reply to your comment shortly
    Kevin · 07/06/2020
    Do you recommend the Restore-A-Deck Stripper/Brightner kit or Gemini Restore-A-Deck kit for preparing a deck? I have a cedar deck that has been stained multiple years ago (unknown amount of time). Plan is to use TWP 100.
    • We will reply to your comment shortly
      TWP Stains · 07/06/2020
      Post a picture of the current condition.
      • We will reply to your comment shortly
        Kevin · 07/06/2020
        Sure, here you go. One of the front deck (March this year) and one of the back (April this year). Not the best shots but what I have now.
        • We will reply to your comment shortly
          TWP Stains · 07/06/2020
          You will have to strip this and use both stripper additives as well: https://www.twpstain.com/wood-stain-strippers/rad-stripper-additives

          Brightener last.
          • We will reply to your comment shortly
            Kevin · 07/06/2020
            Perfect, thanks! I have ~1300 sqft of deck surface. I believe I need 2x Restore-A-Deck Stripper/Brightener kit + 2x thickening gel + 2x booster. Can you confirm? Really appreciate the quick responses. Last question, what is the order to ship timeline?
            • We will reply to your comment shortly
              TWP Stains · 07/06/2020
              Yes on the prep quantity. About 10-5 gallons of the TWP stain. Shipping is about 1-2 weeks currently.
  • We will reply to your comment shortly
    Jan · 07/02/2020
    Will this kit remove Cabot Semi-Solid deck stain? Or should we pressure wash instead?
    • We will reply to your comment shortly
      TWP Stains · 07/02/2020
      No, you will have to sand it off a Cabot semi-solid.
  • We will reply to your comment shortly
    B · 07/01/2020
    Does the restore a deck stripper/brightener ship to Canada? Also is the twp 200 series the only stain that ships to Canada?
  • We will reply to your comment shortly
    Brian · 06/20/2020
    For my western red cedar deck in Oregon, which stain would you suggest after using the RAD stripper/brightener? 1500 series?
  • We will reply to your comment shortly
    Brian · 06/18/2020
    Here are a couple pics of the western red cedar deck. Will the galvanized hog wire panels be okay if i decide to use the stripper and cleaner? Is sanding the deck an option?(would rather not)
    • We will reply to your comment shortly
      TWP Stains · 06/19/2020
      Use the RAD Stripper/Brightener Kit first. Sand only if needed after. Should not harm the wire.
  • We will reply to your comment shortly
    Brian · 06/15/2020
    I built a western red cedar deck here in Oregon last fall. It sat through the winter so I used Oxyclean to clean it before staining. I used Cabot alaskan timber oil "natural" semi trans stain. It now looks kinda like a Mango. Has an orange/yellow tint. Very dis satisfied with the Cabot product. I now would like to remove that stain and use TWP. I considered sanding the whole deck and railing.. Any suggestions?
  • We will reply to your comment shortly
    Brian Stidham · 05/30/2020
    How long do I wait after stripping and brightening before I can stain? Thank you. You guys are the best!
  • We will reply to your comment shortly
    Cathy Hink · 05/26/2020
    Hi I have TWP1011 on my deck (2017). I started to clean (soap and water) and was hoping to reapply stain. Now that I look at it I wonder if I need to strip and brighten before I apply stain? What do you recommend based on the picture? Thanks in advance.
    • We will reply to your comment shortly
      TWP Stains · 05/26/2020
      Strip and brighten with this kit above.
      • We will reply to your comment shortly
        Cathy Hink · 05/26/2020
        How often will I have to strip, brighten and stain?
        • We will reply to your comment shortly
          Eric Willson · 03/25/2021
          If using 1500 series, you'll never have to strip again. For re-coats I pressure wash and after drying apply 1 wet on wet coat of 1500. After 30 minutes wipe off any excess. Ive completed over 3,000 deck in the past 35 years w/ TWP.
        • We will reply to your comment shortly
          TWP Stains · 05/26/2020
          Every 2-3 years.
  • We will reply to your comment shortly
    Brian Deegan · 05/20/2020
    If I did my deck last spring, replaced a ton of boards, used the Restore-A-Deck Stripper and Brightener, and I want to do another coat of stain this Spring, do I need to use the stripper and brightener again? Thanks.
    • We will reply to your comment shortly
      TWP Stains · 05/20/2020
      No, just cleaner for prep.
      • We will reply to your comment shortly
        Brian Deegan · 05/22/2020
        Thank you. You guys are the best out there. The way you answer everybody's questions is amazing and the highest level of customer service I have ever seen. Cheers to all of you!!
  • We will reply to your comment shortly
    Robin · 05/19/2020
    We have a cedar deck with Cabot oil stain on it now. We want to change to the TWP 1500 series, do we need to totally strip the prior stain off?
    • We will reply to your comment shortly
      TWP Stains · 05/19/2020
      Yes. Strip and then Brighten.
      • We will reply to your comment shortly
        Robin · 05/19/2020
        Thank you for your response. I'll get the additives since this could be stubborn to get off.
  • We will reply to your comment shortly
    Kevin · 05/15/2020
    Hello. I have a cedar deck with a Cetol SRD finish that needs a redo. Will the RAD stripper and brightener kit work to remove the stain or do I need to sand it? Thanks.
  • We will reply to your comment shortly
    Scott · 05/14/2020
    I recently stripped my deck brightened it and restained. It now looks like this. Is there any to fix this. Would another coat help?
    • We will reply to your comment shortly
      TWP Stains · 05/14/2020
      Let it cure for a week or two and see if it evens out. Adding more will not fix it.
  • We will reply to your comment shortly
    Kim · 05/12/2020
    Hello! Question about step 8 with the strip + brightening process. From what I researched, I need to make sure the deck is wet down, add the strip product, need to keep it wet while working on it and then wash it off thoroughly. With this process I will be sanding my deck as well a couple days later. When do I use the brightener? Step 8 says while everything is still wet, apply the brightener to neutralize. I am not suppose to do a zone larger then I can accomplish in 15 min. So am I switching between strip and brightener for each 15 min zone? In a previous comment there was comment that the brightener can be applied after the sanding, which would make the process easier. So would the steps be - I would strip, Rinse really well, allow 2 days to dry, sand, complete the brightener process, allow 2 days to dry, then stain? Thank you for any direction.
    • We will reply to your comment shortly
      TWP Stains · 05/13/2020
      Strip all until done and then brighten all after. If sanding then brightener all after the sanding.
  • We will reply to your comment shortly
    Louise · 05/12/2020
    What type of sprayer would you recommend for the 1500 series pecan on a deck previously stained with the 100 series pecan?
    • We will reply to your comment shortly
      TWP Stains · 05/12/2020
      Make sure to prep correctly first. As for sprayers, any good quality pump sprayer will work.
  • We will reply to your comment shortly
    Larry · 05/07/2020
    I will be using the stain stripper, with both additives, and then the brightner, my deck stairs are on a paver walkway, will the stripper or additives damage the pavers or is it ok if it gets on them?
    • We will reply to your comment shortly
      TWP Stains · 05/07/2020
      No they will not harm the pavers.
      • We will reply to your comment shortly
        Larry · 05/08/2020
        Ok thanks, and what about the vinyl siding and my windows?
        also there are some boards that I replaced last year, and I also replaced the stair case, it’s pressure treated pine, should I hit that with the stripper also so everything is uniform , or is there no need?
        • We will reply to your comment shortly
          TWP Stains · 05/08/2020
          No. Just rinse everything well when done to remove soap suds and the grime that comes off the deck. You should clean all the wood and brighten after so it is even.
  • We will reply to your comment shortly
    Danielle · 05/03/2020
    Looking to re-stain our deck again as yearly it has sections where the colour strips away. This is after a good power washing. Do you think it needs a stripper and brightner or just cleanser and prep?

    also, I’m in Canada. What colour is best to match in the 200 series. Thanks
    • We will reply to your comment shortly
      TWP Stains · 05/04/2020
      You have to strip this if using the TWP. Maybe Butternut if you want a brown tone.
  • We will reply to your comment shortly
    Gregg Taylor · 05/03/2020
    In addition, these photos are after pressure washing this weekend after my last time [ressure washing around three years ago.